I’ll try this. Steep a full pound of coarsely ground coffee in 9 cups of cold water in a sort of plastic pail and allow the “mulch” to soak for 12 hours. With the pull of a plug, a thickish coffee syrup drains through a filter into a glass carafe which you then store in the refrigerator. When you want coffee, you measure some into your mug and add hot water or milk. Link.










Link has expired.
Most of these “cold press” brewers are a special-purpose jug with a specially designed filter on the bottom.
Pontificating, I see the only difficult part would be the straining. To do that, I suggest a “Chinois” conical strainer and a wooden pestle.
This strainer is incredibly useful for tasks like steeping fruit in liquor, or making stock from bones or scraps, because the cone means that you get a LOT of surface area, so the liquid comes through quickly. Then you use the wooden pestle to press the remaining stuff to get the last bits of good liquid out of the used-up stuff.
However, chinoises are expensive (you can find a good cheap one for $35, and the usual one is $70), so the other choice is to first pour off as much liquid as possible, then put the grounds into a fabric bag (cheesecloth, muslin, pantyhose) and squeeze out the liquid from the grounds.
Or line a regular strainer with a couple of layers of cheesecloth.
Or use a “gold” coffee filter and process the grounds a bit at a time.
I wouldn’t use paper for this task, because the liquid will evaporate faster than it drips through. And I’m only kidding a little.
In any case, squeeze out as much liquid as possible.
Link has expired.
Most of these “cold press” brewers are a special-purpose jug with a specially designed filter on the bottom.
Pontificating, I see the only difficult part would be the straining. To do that, I suggest a “Chinois” conical strainer and a wooden pestle.
This strainer is incredibly useful for tasks like steeping fruit in liquor, or making stock from bones or scraps, because the cone means that you get a LOT of surface area, so the liquid comes through quickly. Then you use the wooden pestle to press the remaining stuff to get the last bits of good liquid out of the used-up stuff.
However, chinoises are expensive (you can find a good cheap one for $35, and the usual one is $70), so the other choice is to first pour off as much liquid as possible, then put the grounds into a fabric bag (cheesecloth, muslin, pantyhose) and squeeze out the liquid from the grounds.
Or line a regular strainer with a couple of layers of cheesecloth.
Or use a “gold” coffee filter and process the grounds a bit at a time.
I wouldn’t use paper for this task, because the liquid will evaporate faster than it drips through. And I’m only kidding a little.
In any case, squeeze out as much liquid as possible.
This process makes wonderful coffee! Straining is the difficulty. What brands of coffee are you using? I have been using Starbucks Espresso French Press grind and it is expennnnnnnnnnnnnsize! Any other suggestions?
I am using the large gold filter until I can find a better way.
Any suggestions are welcome and thanks!
This process makes wonderful coffee! Straining is the difficulty. What brands of coffee are you using? I have been using Starbucks Espresso French Press grind and it is expennnnnnnnnnnnnsize! Any other suggestions?
I am using the large gold filter until I can find a better way.
Any suggestions are welcome and thanks!
// What's Trending
Raspberry Pi Design Contest
Seventeen Sneaky Secret Hides
Maker Faire: Day Two
10 Things to Connect to Your Raspberry Pi
I Have a (Puzzling) Dream
47 Raspberry Pi Projects to Inspire Your Next Build
Animatronic Beaker Puppet Lip-Syncs to Tunes
// What's Shared
A better way to slice a pumpkin
DIY Nerf Darts
In the Maker Shed: Minty Boost USB Charger
100 Dollar Store Organization Ideas for Craft Rooms and Beyond
Mad’s Mouse House
Lace Princess Crowns
I Have a (Puzzling) Dream
Play the Rings of a Tree Trunk Like a Record
// Most Commented
DIY Hacks & How To’s: Get Emergency Power from a Phone Line
Resin Casting: Going from CAD to Engineering-Grade Plastic Parts
Ten Tips for Screws and Screwdrivers
Ten Tips for Better Measurement
Makers on TV: Big Brain Theory
Arduino Announces New Wireless Linux Board
Tool Review: BioLite CampStove
Pitches with Prototypes: Solar Tracker