Synth-in-a-box

Travel Case
Final
Adam writes – “On a lazy Sunday afternoon, some time back now. I decided to build a synthesizer. Analogue electronics is not really my thing, I’m much more a digital person but when I found a design online for The #3 Standard WoggleBug, I just had to build one.” – Link.

Posted by Phillip Torrone | Sunday July 30th, 2006 4:55 PM

Categories: DIY Projects, Electronics, Music | 5 Comments

In the Maker Shed

Make: Electronics Components Pack 1a

LED Menorah (Hanukkah Electronica)

Geiger Counter Kit

Squishy Circuits Kit

5 Responses to Synth-in-a-box

jihgo on July 30th, 2006 at 5:32 pm said:

I can’t seem to open the schematic image.
Does anyone else have it.

Reply ↓
paulsw on July 30th, 2006 at 6:08 pm said:

I can open it fine, maybe you should try again.

Reply ↓
jihgo on July 30th, 2006 at 9:33 pm said:

Ok now it opens fine.
Where do you get the VTL5C3 and VTL5C3/2 from.

Reply ↓
AdamPierce on July 30th, 2006 at 10:33 pm said:

I couldn’t get a VTL5C3 either so I substituted an opto-isolator I found in my junk box, I can’t remember off the top of my head exactly what the part number was, When I get home tonight I will find the part number and post it here.

Reply ↓
AdamPierce on July 31st, 2006 at 3:46 am said:

Sorry, I remembered wrong. I actually used a 500k pot instead of the VTL5C3. The purpose is to provide some feedback to the LFO, you could do that in lots of different ways, or even leave it out altogether and the thing would probably work just fine.

I made some other changes as I was building it so I could use parts I already had to hand. The only bits I actually bought were the LF398 sample and hold chip, a couple of 1M pots and some colourful knobs. My goal was just to have fun, not neccessarily to stick exactly to Grant’s design.

Reply ↓