Simple switch

Hot Topics:

By Phillip Torrone
Posted 2007/10/27 @ 3:30 am
Category Home

Here’s a simple way to turn something on just by opening the door – good for halloween projects.

In the Maker Shed

Cube 3D Printer

Tux Case for Raspberry Pi

BrushBots

Brooklyn Aerodrome Flying Wing Kit

5 Responses to Simple switch

gregjsmith on October 27th, 2007 at 12:35 pm said:

Is there a link to a article somewhere, or are we just suppose to figure it out by looking at the picture?

Reply ↓
jswilson64 on October 27th, 2007 at 1:15 pm said:

Simple? If cutting the drywall & door framing, installing an electrical box and wiring (not to mention installing a switch that’s not meant to be operated by contact with a door) are “simple,” I’d hate to see what Phil thinks is “complicated” !!!

Reply ↓
JoelSimpson on October 27th, 2007 at 2:42 pm said:

This IS actually pretty simple…as long as you have done some level of framing/drywall. I built a server room in garage with zero experience in either and it actually ended up being A LOT simpler (thought not necessarily easier or less work) than I expected. I rigged up a lever actuated video game arcade style switch to turn on the lights in the server room when I opened the door. It’s kind of gangly and hacked looking. This looks quite a bit cleaner and more stable. Definitely going to give it a try.

My question is, what the heck kind of room/door is that? Is that noise insulation padding on the door? I’m intrigued!

Reply ↓
RDAC on October 27th, 2007 at 8:48 pm said:

Reminds me a lot of the one-way switches they have on commercial deep freezers and walk-ins in restaurants and supermarkets. Those switches are a little more complex, though…they use a rocker mechanism to help keep the top of the door secured as well, but same usage.

Reply ↓
ZapWiz on October 29th, 2007 at 9:03 am said:

I have a light in my server closet that I wanted to turn on only when the door was open. They sell a in-door-frame switch at Home Depot. You cut out a area of the door frame (Hinge side) Installed in only 30 minutes, and cost less then $10.

Reply ↓