Guerilla guide to CNC machining

Hot Topics:

By Becky Stern
Posted 2008/06/30 @ 4:47 pm
Category Robotics, Tools

Michal Zalewski writes:

The page is a remarkably thorough guide to setting up a CNC robot workshop at home, and a first article in a series on CNC robotics. I created it simply because there are virtually no books or useful reference pages for people who want to get into @home fabrication without an extensive background in machining and materials science.

The page itself is devoid of images (although there are some rad ASCII illustrations), so to see some of Michal’s work, visit his photo page.

In the Maker Shed

Make Subscription

BeagleBoard BeagleBone Black

Brooklyn Aerodrome Flying Wing Kit

Getting Started with Arduino Kit v3.0

7 Responses to Guerilla guide to CNC machining

Anonymous on July 16th, 2008 at 5:48 pm said:

This is an awesome article. Thanks for posting, and many thanks to the author for taking the time to write it!

Reply ↓
Greg on July 16th, 2008 at 8:29 pm said:

Guerilla guide to CNC machining…. Very crude! Absolutly rough in spots. Would have liked to have seen more of a guide to what works best as appossed to what didn’t work in general. What is the software of the user that produced the parts on the picture package, as these look great! And in this what was the total cost of the package that included the machine, TYPE, and Software used to product the geometetries of those images. A guide to random bits of precision didn’t help at all as the software CAD/CAM and machine must work in concert to produce these parts. The person probably can say for sure what will work for everyone, but to know the cost of the system and the software and type of each in its class would be helpful. Was this a $1000.00 machine with a $200.00 peice of software or was this an $8000.00 machine with a $3000.00 peice of software? All of that could and would make a big difference.

Thanks
Greg

Reply ↓
- Mexoplex on February 27th, 2012 at 11:11 am said:
  
  you complain when the bubblegum machines dont give you the right color of gum dont you? JC man, lighten up. He didn’t say this was a college credit course.
  
  Reply ↓
cnc hack on October 14th, 2008 at 9:13 am said:

crude but it gets the job done, good for hobbyists and beginner diy enthusiasts, my blog is better http://cncmachining.wordpress.com

Reply ↓
Pingback: MAKE | Robot With Four-Wheel Steering
Pingback: Robot With Four-Wheel Steering « vis a vis | visual mind
Jordan on February 27th, 2013 at 3:12 pm said:

CNC machining is the future of manufacturing

Reply ↓