This sculpture was made from several dozen bicycles that were connected to each other at the wheel hinge by a simple seperation of the quick release lever that typically allows one to exchange or remove tires. Pretty interesting structure that somehow manages to balance using the seats as feet.











The rear wheel has a set of gears, and so is wider. And so, the opening in the rear of the frame is wider than the opening in the front forks.
I don’t see any gears on these bikes.
So clearly it isn’t as simple as suggested.
Gear removing, bending, and forcing probably has to be done.
You have mentioned very interesting points! ps decent site
// What's Trending
Raspberry Pi Design Contest
Maker Faire: Day Two
Seventeen Sneaky Secret Hides
Maker Faire: Day One
10 Things to Connect to Your Raspberry Pi
DIY Hacks & How To’s: Swiss Army Key Ring
A Photo Tour of Maker Faire
// What's Shared
A better way to slice a pumpkin
DIY Nerf Darts
In the Maker Shed: Minty Boost USB Charger
100 Dollar Store Organization Ideas for Craft Rooms and Beyond
Mad’s Mouse House
Lace Princess Crowns
I Have a (Puzzling) Dream
Play the Rings of a Tree Trunk Like a Record
// Most Commented
DIY Hacks & How To’s: Get Emergency Power from a Phone Line
Resin Casting: Going from CAD to Engineering-Grade Plastic Parts
Ten Tips for Screws and Screwdrivers
Ten Tips for Better Measurement
Makers on TV: Big Brain Theory
Arduino Announces New Wireless Linux Board
Tool Review: BioLite CampStove
Build a “Boomcase” and Upcycle that Old Suitcase