MAKE subscriber S1axter, of myBitBox, has put together details on building a basic, filtered 5v power regulation unit based on the ubiquitous LM7805 voltage regulator. You can either build it out of a handful of parts you can get at your local electronics shack, or buy a little kit he’s put together.
More:
Not bad, but the 7805 regulator needs a penny heatsink. :*)
Dave
Add a transformer and heatsink, put it in a nice box with 5-way posts, make a set of them at different voltages, and that’s what my dad made about 35 years ago and I still use sometimes to this day.
http://www.romanblack.com/smps/smps.htm
and wants its 7805 back.
There are switching regulators out there, so use them.
e.g. LM2576 T-ADJ: 3A, 1,23 – 37V, 45Vs, TO-220-5
Additional external components needed are more or less 2 inductors. The datasheet has lots of suggestions on how to build different versions.
// What's Trending
Raspberry Pi Design Contest
Maker Faire: Day Two
Seventeen Sneaky Secret Hides
10 Things to Connect to Your Raspberry Pi
47 Raspberry Pi Projects to Inspire Your Next Build
Maker Faire: Day One
I Have a (Puzzling) Dream
Controlling 5 Servos With a Raspberry Pi
// What's Shared
A better way to slice a pumpkin
DIY Nerf Darts
In the Maker Shed: Minty Boost USB Charger
100 Dollar Store Organization Ideas for Craft Rooms and Beyond
Mad’s Mouse House
Lace Princess Crowns
I Have a (Puzzling) Dream
Play the Rings of a Tree Trunk Like a Record
// Most Commented
DIY Hacks & How To’s: Get Emergency Power from a Phone Line
Resin Casting: Going from CAD to Engineering-Grade Plastic Parts
Ten Tips for Screws and Screwdrivers
Ten Tips for Better Measurement
Makers on TV: Big Brain Theory
Arduino Announces New Wireless Linux Board
Build a “Boomcase” and Upcycle that Old Suitcase
Tool Review: BioLite CampStove