Reaching for your glasses won’t help you read this book. Teeny Ted from Turnip Town, written by Robert Chaplin, is written on tablets only 11×15 microns (1/1000 of a millimeter) wide. That means that you will need an electron microscope to read it. Though it was created back in 2007, this is the first I have heard of it.
To make the book, a focused ion beam machine was used to carve the pages into tablets of single-crystal silicon. It’s a pretty impressive feat to print an entire book in less than 7000 square microns, however I wonder how much physical space it would take to store it in digital form on a modern flash drive. Anyone know the calculation? [via international exhibition of calligraphy]











It seems like modern NAND Flash has a bit size of 0.01 µm².
Lets assume that there is 70 characters on each “table” – this would give us 70 chars * 30 tables * 8 bits per byte of information = 16800 bits.
The area of the book in a modern flash memory would then be 168 µm² or about 40 times smaller than this book, but you of course can’t read it with an electron microscope as flash
Similarly on a hard disk, assuming a modest areal density of 500 Gigabits per square inch, the same 16800 bits occupy an area of only about 2 µm², assuming the bits are written as simple 1s and 0s. With an encoding scheme, this would increase by a factor of 2 or so.
And you could potentially read that with a good magnetic force microscope.
// What's Trending
Raspberry Pi Design Contest
Ten Tips for Adhesive Tape
Seventeen Sneaky Secret Hides
Lost PLA Casting from 3D Prints
I Have a (Puzzling) Dream
10 Things to Connect to Your Raspberry Pi
47 Raspberry Pi Projects to Inspire Your Next Build
Maker Pro: How Much Should I Charge?
// What's Shared
A better way to slice a pumpkin
DIY Nerf Darts
100 Dollar Store Organization Ideas for Craft Rooms and Beyond
In the Maker Shed: Minty Boost USB Charger
Mad’s Mouse House
Lace Princess Crowns
I Have a (Puzzling) Dream
Play the Rings of a Tree Trunk Like a Record
// Most Commented
DIY Hacks & How To’s: Get Emergency Power from a Phone Line
Resin Casting: Going from CAD to Engineering-Grade Plastic Parts
Ten Tips for Screws and Screwdrivers
Ten Tips for Better Measurement
Is it a Hackerspace, Makerspace, TechShop, or FabLab?
Makers on TV: Big Brain Theory
Arduino Announces New Wireless Linux Board
Grow: A Portable CNC Router System