The world's tiniest workshop?

smallestworkshop1.jpg
smallestworkshop2.jpg

MZ_MakeTime-Space_Badge3
Instructables user steliart of Nicosia, Cyprus built this incredible 5′x5′ workshop in a storage room off his parking space. In order to make every tool fit, he designed a storage system in Sketchup. When he wants to work, he pulls everything out and uses his parking space as an open-air workshop. [Thanks, Brian!]

MakeShift 21 deadline May 28th

makeshift21.jpg

You’ve got one month left to submit your solutions for the MakeShift featured in MAKE Volume 21. The deadline is Friday, May 28. Here’s the challenge:

The Scenario: You’ve had a long and crappy day at work. What’s more, it’s raining. Hard. You pile into the front seat of your car with your umbrella, waterproof storm coat, and briefcase, comforted only by the sight of a zip-lock plastic bag with homemade cookies. You plug in your cellphone, secure it to the hands-free mount on the dashboard, start the engine, and hit the road.

Traffic sucks, so you decide to get off the highway onto a winding, back-road shortcut that runs along the nearby river. Which would’ve been fine, until a deer suddenly darts across the road, causing you to swerve, skid, and go bounding down the embankment to crash-land in the river.

The Challenge: When you recover from the initial shock enough to utter a few choice expletives, you notice the airbag has deployed — protecting your upper body from the crash — but your legs and ankles really hurt, and might very well be broken. What’s more, the river water is rapidly rising into the passenger compartment from below. Fortunately, the door latch seems to work, the river’s current isn’t too swift, and you’re a pretty strong swimmer. But it’s dark, raining, and you’re miles off the beaten track. What are you going to do now?

What You’ve Got: In addition to the aforementioned items, there’s a small flashlight and a Swiss Army knife or Leatherman tool in the glove box, plus the typical work-related items in your briefcase. Talk about needing a bailout … good luck!

To Enter: Send a detailed description of your MakeShift solution with sketches and/or photos to makeshift@makezine.com by May 28, 2010. If duplicate solutions are submitted, the winner will be determined by the quality of the explanation and presentation. The most plausible and most creative solutions will each win a MAKE T-shirt and a MAKE Pocket Ref. Think positive and include your shirt size and contact information with your solution. Good luck! For readers’ solutions to previous MakeShift challenges, visit makezine.com/makeshift.

Bottle opener ring for bartenders

Bottle_Opener_Ring.jpg

Dustin Wallace, whose Oriboto Robotagami I am always raving about, also makes this wicked-looking wearable bottle opener intended for beverage-slangin’ professionals. You can wear it on the top or bottom of your palm. It’s good-looking, provides plenty of leverage, and seems like it might come in handy when the guys in black cowboy hats start smashing bottles over people’s heads.

More:

Robot learns to balance on ball, bears facing unemployment

Japanese roboticists Dr. Masaaki Kumagai and Takaya Ochiai built this impressive self-balancing robot. Called BallIP, or Ball Inverted Pendulum, it balances on a bowling ball, and is able to travel laterally as well as forward and backward, due to its omnidirectional drive train. It apparently uses both gyroscopes and accelerometers to detect its inclination, and works in a similar manner to an inverted pendulum robot. [via boingboing]

Geek Chic: T-shirt roundup

MZ_GeekChic.gif

As April comes to a close, so does our coverage of nerdy style: Geek Chic. We’ve covered everything from bike accessories to ties that don’t suck. Now I want to talk about my fashion staple of choice, the t-shirt.

Let’s face it, a roundup of great geeky t-shirts could easily run a hundred shirts with awesome ones still left out. Nevertheless, here are some of my faves:

void.jpg

Void Your Warranty
Gotta go with the home team on this processing.jpg

Processing: Beauty
Processing art has a unique look, so what better way to show your support than a shirt emblazoned with Processing art?

shirtwoot.jpg

Shirt.Woot
Shirt.Woot offers a new geeky shirt each day, costing $10 including shipping. If you miss that shirt, you’re out of luck… you might be able to get the shirt still, but it won’t be sold at ten bucks. You may not find a shirt you’ll like every day, but if you check back often enough, one is sure to crop up.

makerbot.jpg

MakerBot
I love my 1aeon. Wear it and show your support for the coolest start-up around!

atomsshirt.jpg

Atoms Apparel
These low-key but excellently nerdy shirts revel in everything from ‘tronics to band. Something for everyone, decent color selections and refreshed fairly frequently.

miniboss.jpg

MiniBoss
I just love this 8-bit monster shirt, available from the Maker’s Market.

helbotica.jpg

Helbotica
Another Maker’s Market gem, the Helbotica shirt pokes a little fun at the iconic sans by forming a robot out of the typeface’s glyphs.

thinkgeek.jpg

ThinkGeek
These guys are trying really, really hard to corner the market on geekiness, and it’s a lot of fun to watch. I have too many TG faves to list here, but their Resistance is Futile, ROFLcopter, Binary and I Void Warranties shirts stand out.

Readers, think of something I missed? Add your own suggestions in comments!

Giant 'inkjet' printer uses paintballs to draw images

German design group Sonice Development GmbH built this large-scale printer, called the Facade Printer. It’s basically a fancy, computer-controlled paintgun. It seems they have come a long way since we first covered their project back in 2006. Anyone ever hook this up to GRL’s L.A.S.E.R. Tag? [via dudecraft]

More:

Maker Faire video album: Hand of Man


Another favorite video moment from Maker Faire, which is coming up On May 22nd and 23rd: Christian Ristow’s Hand of Man at Maker Faire Bay Area 2009!

That was last year, and for a taste of what’s to come this year, check out Goli’s interview series:

In the Maker Shed: Pocket Piano Synth kit

MKCG2-2.jpg

The Pocket Piano Synth kit makes your Arduino into a portable stand-alone music synthesizer.

This board plugs directly into the Arduino board and provides 25 multiplexed keys (2 full octaves), 4 pots, status LED, reset switch, digital to analog converter IC, and an RCA audio jack. The Arduino board with its powerful AVR processor is more than adequate for a wide range of sound synthesis techniques. We have experimented with simple additive / wave-table synthesis, frequency modulation, ring modulation, sampling, polyphony, and various arpeggiators. The whole thing can be powered over the Arduino’s USB port for convenient experimenting. (Arduino not included.)

The board is designed to mount easily to 1/8″ panel material, and 1/2″ round keys can be made out of wood or plastic. Open source rock!

Features

  • 25 keys and multiplexer circuitry
  • 4 potentiometers; 1 controls output level
  • Microchip MCP4921 12-bit SPI DAC
  • Passive low pass output filter

Pocket Piano Synth kit

Parsons Design & Technology symposium opening night

mfadtthesis20101.jpg

I attended the Parsons Design & Technology thesis symposium opening last night, great stuff! Above is an installation by Christina Speligene. Below: Zach Gage’s “Data” counts visitors. The show is open all weekend in NYC.

mfadtthesis20102.jpg

OneZero: MFA Design and Technology Thesis Symposium
Exhibition April 30, 2010 – May 2, 2010
Sheila C. Johnson Design Center
66 Fifth Avenue at 13th Street, New York, NY 10011.
Gallery hours: Open daily 12:00 pm to 6:00 pm and late Thursday evenings until 8:00 p.m.