The wildly popular video of this German bike lock prototype blew me away. Clamp your bike to the motorized unit, and it scurries up a lamp post, securing your bike in the sky. [via GOOD]

The wildly popular video of this German bike lock prototype blew me away. Clamp your bike to the motorized unit, and it scurries up a lamp post, securing your bike in the sky. [via GOOD]

This will work great, until someone else also attaches and ascends a bike on the same pole, under the first one, and is nowhere to be found when the first bike’s owner needs his bike back.
This will work great, until someone else also attaches and ascends a bike on the same pole, under the first one, and is nowhere to be found when the first bike’s owner needs his bike back.
This will work great, until someone else also attaches and ascends a bike on the same pole, under the first one, and is nowhere to be found when the first bike’s owner needs his bike back.
This will work great, until someone else also attaches and ascends a bike on the same pole, under the first one, and is nowhere to be found when the first bike’s owner needs his bike back.
This will work great, until someone else also attaches and ascends a bike on the same pole, under the first one, and is nowhere to be found when the first bike’s owner needs his bike back.
This will work great, until someone else also attaches and ascends a bike on the same pole, under the first one, and is nowhere to be found when the first bike’s owner needs his bike back.
Good point – Could they put in some sort of “intelligent” sensor that won’t allow it to ascend if there’s already a bike on a pole?
simples-a microswitch that reverses the motor if it hits an obstruction. Should have that anyways, Im guessing. I suppose since its an IR device-the tech behind a TVBgone could jam IR activity if your bikes up there, obv not jam YOUR IR activity.
That’s makes sense. Also, you don’t have to carry a few pounds of metal and motors around in your backpack. It would them become an added source of income for the owner, probably the local municipality (which will now have an incentive to encourage theft of bikes not using their protection racket, uh I mean protection system.).
That’s makes sense. Also, you don’t have to carry a few pounds of metal and motors around in your backpack. It would them become an added source of income for the owner, probably the local municipality (which will now have an incentive to encourage theft of bikes not using their protection racket, uh I mean protection system.).
Kind of like this? http://www.biketree.com/
simples-a microswitch that reverses the motor if it hits an obstruction. Should have that anyways, Im guessing. I suppose since its an IR device-the tech behind a TVBgone could jam IR activity if your bikes up there, obv not jam YOUR IR activity.
I didn’t read Jeff’s comment. I had the exact same question.
curious how these stories skip across the temporal pond. this one is approximately a year old. and even nearly the same comments are (serendipitously?) revisited …
http://www.engadget.com/2010/11/29/bicycle-lock-climbs-poles-encourages-would-be-thieves-to-look-e/
curious how these stories skip across the temporal pond. this one is approximately a year old. and even nearly the same comments are (serendipitously?) revisited …
http://www.engadget.com/2010/11/29/bicycle-lock-climbs-poles-encourages-would-be-thieves-to-look-e/
What happens when the batteries run out and your bikes still “safe” up a lampost? I hope theres a battery warning light.
Great idea! Where can I follow the project? Good luck.
What if someone figures out what frequency your remote is? Bye Bye Bike.
What if someone figures out what frequency your remote is? Bye Bye Bike.
// What's Trending
Raspberry Pi Design Contest
Seventeen Sneaky Secret Hides
Maker Faire Bay Area Ready for Showtime
A Photo Tour of Maker Faire
Sneak Preview: The Wheeled Wonders of Maker Faire
10 Things to Connect to Your Raspberry Pi
New Arduino Robot Available in the Maker Shed at Maker Faire
I Have a (Puzzling) Dream
// What's Shared
A better way to slice a pumpkin
DIY Nerf Darts
In the Maker Shed: Minty Boost USB Charger
100 Dollar Store Organization Ideas for Craft Rooms and Beyond
Mad’s Mouse House
Lace Princess Crowns
I Have a (Puzzling) Dream
Play the Rings of a Tree Trunk Like a Record
// Most Commented
DIY Hacks & How To’s: Get Emergency Power from a Phone Line
Resin Casting: Going from CAD to Engineering-Grade Plastic Parts
Ten Tips for Screws and Screwdrivers
Ten Tips for Better Measurement
Makers on TV: Big Brain Theory
Grow: A Portable CNC Router System
Tool Review: BioLite CampStove
Pitches with Prototypes: Solar Tracker
Trending Topics
Get our Newsletters
About Maker Media
Subscribe
to MAKE!
Get the print and digital versions when you subscribe