Tool Review: NWS Ergonomic Long-Nose Pliers

Workshop
NWS Ergo-Grip Long-Nose Pliers Size

MZ_Toolbox2010.gif

NWS Ergo-Grip Long-Nose Pliers Size

You probably have never heard of NWS before, have you? They’re a German hand tool manufacturer that produces some really sweet pliers and cutters. Today I’d like to focus on the NWS ergonomic electrician’s pliers (angled long-nose pliers), which are designed to be held and used with a straight wrist.

Ergonomic and pistol-grip pliers can offer a number of advantages over traditional-styled pliers. As you can see in the following photo, regular pliers point up at a 45° angle when held naturally with a straight wrist. Ergonomic pliers, on the other hand, are angled forward by about 45° such that the jaws are oriented in line with one’s arm.


NWS Long-Nose Pliers Hand Grip

As slight a difference as it might seem, straightening your wrist results in greater twisting and pulling power, easier tight-quarters access, and improved user comfort.

NWS Ergo-Grip Long-Nose Pliers Hand Angle

I first learned about NWS pliers a couple of months ago and promptly purchased a few pliers and cutters to try out. Since then, these ergonomic long-nose pliers have become one of my favorite tools to use. Actually, I have become quite fond of all of the NWS pliers now in my toolbox, but perhaps that’s a story for another time.

NWS Ergo-Grip Long-Nose Pliers Jaws Closeup

The spring-action long-nose pliers feature a straight-grooved gripping area, crimping anvils, two-size wire strippers, and a hard/soft wire cutter. The handle has a three-material composition with medium-hard plastic, soft and textured grip zones. There’s also a built-in spanner (box-end wrench) and a lock to keep the jaws closed during storage or transport.

Quality-wise, these pliers are absolutely fantastic. The black-PTFE (Teflon-like) coating shows no sign of chipping or peeling, the jaws are perfectly formed and grooved, and the cutters meet with zero gaps. I would have preferred a knife-anvil cutter profile rather than knife-knife, but there’s no sign of misalignment or premature dulling.

NWS Ergo-Grip Long-Nose Pliers Grip Closeup

These pliers are usually the first I reach for when working inside of a computer case or project box, where a high density of components and wires requires a completely straight angle when installing or removing parts. The NWS pliers have large jaws and are not designed for precision work, so my hemostats still see a fair bit of action.

Although the ergo pliers are great for general purpose and even heavy-duty usage, they do have limitations. While they are incredibly comfortable to use, certain tasks are best accomplished with traditional-styled pliers. It all depends on the task at hand and grip angles needed to access the parts awaiting manipulation. As such, pliers like these will complement but not replace ordinary styled ones.

The model number for these long-nose pliers is 1406-69-200. If you’re not a fan of the PTFE coating, there’s also a matte chrome option – 1406-49-200. Ergo-style pliers with wider combination jaws are also available (1096-69-200 and 1096-49-200). The pliers are priced at $35-40 and are currently only carried by two USA distributors – German-Hand-Tools and Chads ToolBox. Both vendors are highly recommended, but be sure to ask if the pliers are in-stock and not back-ordered before you place an order.

Stuart Deutsch is a tool enthusiast, critic, and collector. He writes his passion at ToolGuyd.

6 thoughts on “Tool Review: NWS Ergonomic Long-Nose Pliers

  1. David says:

    “regular pliers point up at a 45° angle when held naturally with a straight wrist.”
    Holding a straight pliers upside down can give the same access.

    1. Stuart Deutsch says:

      Actually, holding straight pliers upside down can sometimes provide for better access and comfort, such as when one is seated and working down inside a project case at elbow-height.

      But when working on something at shoulder-level, for example, ergonomic pliers are significantly more comfortable to use.

      Ergonomic pliers won’t replace regular pliers, but they do provide distinct advantages.

  2. David Frane : Hard-to-Find Brand of Hand Tools says:

    […] blogger at Make Magazine posted this nice review of some NWS needle nose pliers – including a pair with an unusual angled […]

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

When I am not testing and reviewing new tools, I am working on robotics, electronics, woodworking, and other types of projects.

I am also interested in microscopy, the physical sciences, and new technologies.

I write about tools and workshop topics at ToolGuyd.com.

View more articles by Stuart Deutsch

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK