Dimmable LED Light Panel

Hot Topics:

By Adam Flaherty
Posted 2012/02/14 @ 4:00 am
Category Photography & Video

If you’re looking for a cheap fill light for your video work, check out YouTube member DTapeProductions DIY light panel using stick-on 12V LED light strips. It’s not going to be daylight temperature or color corrected, but it’ll throw some accent light where you’ll need it for cheap. In the video they say you’ll have to solder the strips together, but if you’d like to save some time, you’ll find that there are plenty of solderless connectors available online. [via cheesycam]

In the Maker Shed

Gift Certificate

Getting Started with Raspberry Pi

Calculator Kit from Spikenzie Labs

MAKE Rovera 4WD Arduino Robot Kit

5 Responses to Dimmable LED Light Panel

US Spambot on February 14th, 2012 at 7:26 pm said:

LEDs still don’t have the CRI to do video or photographic work. May as well use a $50 P&S in video mode if you’re going to do this.

Reply ↓
- Hank on February 14th, 2012 at 8:19 pm said:
  
  Interesting since I’ve done commercial photography and scientific macro photography with LED’s and, if any was needed, do post color correction in PS. With some experimentation a custom color profile can easily be set up in any decent dSLR. Funny, B+H sells quite a few of these from what I hear. http://www.bhphotovideo.com/c/search?atclk=Brand_Litepanels&ci=12248&N=4294551085+4291362268
  
  Reply ↓
- Rob C on January 24th, 2013 at 10:42 am said:
  
  I work for a production company. Half the lights we use are LED.
  
  Reply ↓
Hank on February 14th, 2012 at 8:03 pm said:

Nice project guys! Well done!

Reply ↓
Kevin Merinsky on February 18th, 2012 at 3:11 pm said:

Just a few problems. When you up the number of LEDs to1200 thats roughly about 10 times the draw. Your battery may need some upgrading. Also it seem that you are dimming the LEDs by voltage instead of PWM, which to me says that there shouldn’t be any flicker but have you tested it? Any idea of the color temp these current LEDs are producing? Have you thought of making a RGB version of this so you can control color temp?

Reply ↓