3D Printer Trading Cards: The Prusa Mendel

Hot Topics:

By Shawn Wallace
Posted 2012/05/07 @ 10:30 am
Category 3D Printing

I had a dream that I found a box of 3D Printer Trading cards from 2012 at the Seekonk Speedway Flea Market. When I awoke I realized that might be a good way to introduce some of the 3D printer makers who will be exhibiting at the Maker Faire Bay Area next week. I’ll be posting these all week in no particular order; collect them all!

I’ll be at the Faire covering 3D Printers. If you make 3D Printers (or know someone) who plans to attend, feel free to drop me a line at swallace@oreilly.com.

Collect them all!

BY Shawn Wallace

In the Maker Shed

Calculator Kit from Spikenzie Labs

Arduino Robot

Arduino Uno Rev 3 (Make SMD Version)

MAKE Rovera 4WD Arduino Robot Kit

6 Responses to 3D Printer Trading Cards: The Prusa Mendel

balloondoggle on May 7th, 2012 at 10:41 am said:

Oops, I thought you were going to print 3D trading cards.

Reply ↓
- Aaron Shaw on May 7th, 2012 at 11:54 am said:
  
  And I thought it was going to be slightly recursive, printing 3D trading cards on 3D printers on those 3D printers.
  
  Reply ↓
  
  rocketguy1701 on May 7th, 2012 at 12:11 pm said:
  
  You could do it even with just one color using embossing, but the dualstruders will have an advantage.
  
  Reply ↓
  
  chris shay on May 18th, 2012 at 6:51 am said:
  
  Your bias for dualstruders is obliqueous.
  
  Reply ↓
  
  rocketguy1701 on July 17th, 2012 at 10:35 am said:
  
  Technically true, as I had to raise one side of my dualstruders to level the print heads. But it’s probably less than 0.1deg off 90deg.
jaf on May 9th, 2012 at 11:29 pm said:

so will there be more of these or was it a one off thing?

Reply ↓