Raspberry Pi and Lego Supercomputing Cluster

Hot Topics:

By Adam Flaherty
Posted 2012/09/13 @ 2:00 am
Category Fun & Games

Named after the University of Southampton’s Iridis super computer, Professor Simon Cox’s Iridis-Pi is a supercomputing cluster consisting of 64 Raspberry Pi single board computers enclosed in a modular Lego rack enclosure. A couple of orders of magnitude less expensive than the big guns, Iridis-Pi really shines as an educational tool to explore how supercomputers are made. [via Raspberry Pi]

BY Adam Flaherty

I make cool stuff and write about other people making cool stuff on makezine.com. If you have something you think I should see, send me a tip.

In the Maker Shed

6 Responses to Raspberry Pi and Lego Supercomputing Cluster

Jacob on September 13th, 2012 at 6:44 am said:

Can it run a real os with 20 of them,within could make a powerfully computer! For a small price and would be upgradable!

Reply ↓
- Adam Flaherty on September 13th, 2012 at 9:32 am said:
  
  It’s an ARM processor, so it will run the usual suspects. Linux, Android, etc.
  
  Here’s a page with links to SD card images: http://www.raspberrypi.org/downloads
  
  and Adafruit has a distro, based on Raspbian, called Occidentalis: http://learn.adafruit.com/adafruit-raspberry-pi-educational-linux-distro/occidentalis-v0-dot-2
  
  So, yeah, it can run a “real os” on all 64 of them if you wanted. Not the best bang for the buck, but still pretty cheap, if you want to get into clusters.
  
  Reply ↓
HW guru on September 13th, 2012 at 2:44 pm said:

Make sure to check the hardware compatibility pages for SDHC card brands, and don’t buy the sdcards off ebay… like 50% will not work well =(….

I use a SanDisk “super” 16GB class 6 card in mine, and the 8GB model should be around $10.

Additionally, check if your model is on the hardware errata list. You may need at least a >1A 5v USB power supply or external USB hub to ensure your mouse and keyboard will have enough power.

The Occidentalis v0.2 debian distro from Adafruit (nice company) is also pre-compiled to support all the lower level i/o libs for popular sensors. The Adafruit version of the distro is intended for hardware people, and has install scripts to automatically grow the install image to fill the capacity on your sdhc card.

There are some other quirks with the Model B, but if you think you can help out testing people will definitely be appreciated. The confirmed hardware list needs as many people’s feedback as possible given it reduces the chances people may purchase incompatible hardware.

Reply ↓
Todd Perry on September 13th, 2012 at 8:44 pm said:

Great project…. Of course, I’m mainly amazed they could GET 64 Pi’s!

Reply ↓
Pingback: MAKE | Your Comments
Pingback: ○DIY/Tip▶ Your Comments « dot dot dob tob tob