I love all of the clever projects, usually communicated in images only, that float around Facebook and G+. This one was spotted on the Whynomics Facebook page. Sadly, most of them usually have no attribution or additional information. This pantomimed project obviously shows how to make a neat little sandwich caddy by simply cutting, scoring, and folding a gallon plastic milk jug. A Velcro dot is used as the fastener.



You can see the original post and more complete directions at http://familyfun.go.com/crafts/reusable-lunch-containers-785113/ including a nifty idea to use juice cartons as well.
Thanks for that link, Professor! How are you doing?
Nothing sticks to polyethylene for very long. The stick-on Velcro will grab its mate harder than its sticky back can hang onto the jug unless you stitch it to the plastic. Better to crimp in a snap or cut a tab-and-slot closure to make this work for more than one sandwich (or photo shoot).
Good idea! Another (lower tech) possibility would be to make a slot and tab type fastener. It might get bent and not work if you aren’t careful, but it will probably handle getting washed better and doesn’t require any additional tools.
I used Duck Tape with a courtesy tab to keep mine shut. Never underestimate the power of Duck Tape!
A nifty idea, but I’d be a little concerned about keeping this sanitary. I’m not sure this sort of plastic will hold up well in a dishwasher, but I think you would want to give it a good hot-water wash after use to keep the microbes under control.
I made one of these caddy’s & packaged up some homemade cookies in them as a gift. I used E6000 to attach the velcro dot, but I like William’s idea about crimping on a snap!
Pingback: MAKE |
Pingback: ○DIY/Tip▶ And we’re back with our forty-sixth installment of Your « dot dot dob tob tob
Hate to be the science nerd in the room, but plastic is actually quite porous on a microscopic level. The nooks and crannies do an excellent job of holding onto bits of whatever was in contact with it, which means this repurposing of a milk container is providing a growing medium for whatever bacteria it accumulates. This is why it’s generally a bad idea to re-use plastic bags, even if you’ve rinsed them out.
I don’t know about your area, but in mine, those jugs have a $2 deposit. $2 can buy a much better sandwich container.
where is it that they have a deposit like that? very impressive if true- but what is the point really?
Cool.
I think a rubber band would hold it closed just fine. I also think there’s nothing wrong with a few ambient microbes, unless you are using this container to hold an organ for transplantation.
thankyou!
Haha…I love how you phrase that. Unless we don’t have a functioning immune system I guess we should be able to deal with a few microbes. Organ transplant certainly puts it on awhile different plane…
Pingback: 우유병으로 샌드위치 가방 만들기 | Make: Korea
// What's Trending
Raspberry Pi Design Contest
A Photo Tour of Maker Faire
Maker Faire: Day One
Seventeen Sneaky Secret Hides
Arduino Announces New Wireless Linux Board
Maker Faire Bay Area Ready for Showtime
10 Things to Connect to Your Raspberry Pi
New Arduino Robot Available in the Maker Shed at Maker Faire
// What's Shared
A better way to slice a pumpkin
DIY Nerf Darts
In the Maker Shed: Minty Boost USB Charger
100 Dollar Store Organization Ideas for Craft Rooms and Beyond
Mad’s Mouse House
Lace Princess Crowns
I Have a (Puzzling) Dream
Play the Rings of a Tree Trunk Like a Record
// Most Commented
DIY Hacks & How To’s: Get Emergency Power from a Phone Line
Resin Casting: Going from CAD to Engineering-Grade Plastic Parts
Ten Tips for Screws and Screwdrivers
Ten Tips for Better Measurement
Makers on TV: Big Brain Theory
Grow: A Portable CNC Router System
Tool Review: BioLite CampStove
Pitches with Prototypes: Solar Tracker
Trending Topics
Get our Newsletters
About Maker Media
Subscribe
to MAKE!
Get the print and digital versions when you subscribe