Math Monday: Linkages – Give ’em the Second Degree

For the Museum of Mathematics

Math_Monday_banner02_600px.jpg

We’re back after a short hiatus — hope your 2013 is starting out mathematically auspiciously. (And lest the last two digits of the year worry you, note that typically, from a mathematical point of view, the multiplicative factors of a number are more significant than addends that produce the number. After all, every number is 13 plus something, so there’s not much meaning to the fact that 2013 = 2000 + 13. But 13 is not a factor of 2013 = 3 * 11 * 61, so no need for triskadekaphobes to worry.)

This is another installment in our epic Math Monday series on the intricate world of mechanical linkages. See the Linkages series introduction for the MoMath Linkage Kit, an introduction, and general instructions.

So, by now we’ve seen linkages that trace out curves described by fourth degree polynomials, and sixth degree polynomials, and most recently, lines: “curves” of degree one. So, the natural question: is it possible to trace out a curve of degree two? Indeed, it is, and this column gives you a linkage for a parabola. Interestingly, like the Peaucellier linkage for a straight line, this linkage depends on the technique of inversion in a circle. In fact, you should be able to see a copy of the Peaucellier linkage embedded in this one. It’s the most complex linkage in this MoMath series.

Parabola Linkage.
Ingredients: Two 60-bars with a hole at 45 (A and C); two 30-bars (B and D); two 40-bars (E and F); four 20-bars (G, H, I, and J); and a pen.

Directions: Fix A horizontally. Link A-60 to B to C-0. Link C-60 to D to A-0, making sure to cross C over A. Link A-45 to E and F. Link the far end of E to G and H. Link the far end of F to I and J. Link the far ends of H and J to C-45. Link the far ends of G and I with a pen.

To use: Rotate B left and right as far as it will go, keeping the pen in the hole drawing on the paper.

Here’s a picture of the completed linkage:

jcdifdec

A reminder — be careful to cross the two 60-bars as in the above picture. You don’t want the first four bars to form a parallelogram. In other words, you don’t want your linkage to come out looking like this paper model:

2ndDegree2

And finally, here’s the parabola linkage in action, drawing a rather lovely curve:

eigjdibb

For a real Math Mondays challenge, work out why this linkage produces a perfect parabola. You can also find linkages on the web for the other conic sections: ellipses and hyperbolas. (The linkage for a circle was covered in the very first column: it’s the 1-bar linkage known as a “compass”.)

Comments are closed.

Discuss this article with the rest of the community on our Discord server!

Gareth Branwyn is a freelance writer and the former Editorial Director of Maker Media. He is the author or editor of over a dozen books on technology, DIY, and geek culture. He is currently a contributor to Boing Boing, Wink Books, and Wink Fun. His free weekly-ish maker tips newsletter can be found at garstipsandtools.com.

View more articles by Gareth Branwyn

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK