Duct Tape stress tests

sm.jpgIf you're wondering what the strength of duct tape might be Make reader Taylor reports in with some possible clues...I decided I needed a hammock in my dorm room, and what better way than duct tape. I attached 4 strips on either side to the ceiling, making a loop at the bottom. I then used some clothes line and 2 carabiners to attach the hammock. The whole setup can hold my 200 lb friend (he fell asleep for 4 hrs in it). Under that stress each strip is holding around 25 lbs (assuming the weight was equally distributed, which I did my best to do). I haven't pushed it to the limits yet, maybe this weekend I'll see just how much it can take (Photo 1, Photo 2, Photo 3).

Recent Entries

Comments

Oldest comments listed first.

Posted by: mattyc on April 5, 2005 at 8:37 AM

I've seen that waffle-shaped ceiling before. Do you go to WPI? Live in Stoddard?


Posted by: MattGrommes on April 5, 2005 at 8:50 AM

Man, that just gave me a great idea: A Duct Tape Hammock. Not just attaching a regular hammock, making one totally out of duct tape. A friend of mine made a shirt from the magical tape and that thing was tough. Hmm, off to the garage! :)


Posted by: OldMike on April 5, 2005 at 11:34 AM

Many years ago (ca 1955 - 1958) I fastened a bookshelf to a wall using essentially the same technique (I used gummed picture hangers). It worked perfectly for several months, then I was awakened one night by a tremendous crash. Examination showed that there was a failure of the bond between the paint and the plaster on the wall, rather than the bond between the hangers and the paint. Think of the shock of being dumped out of a hammock in the middle of the night!


Posted by: futurefeeder on April 5, 2005 at 6:45 PM

In high school we duct taped our 140lb. science teacher to the ceiling of our dormitory. Ah, the wonders of duct tape.


Posted by: adricm on April 6, 2005 at 12:23 AM

one party (geeky party) it got decided to see how much tape would be required to tape a bowling ball to a wall.. us geeks of all trades ve engineers,

we won, only took 10feet.. they used most of a roll, and their bowling ball fell in an hour, ours stayed for 3 days...

trick? 2 long strips one making kind of a '6' shape sling with some cross bracing at the bottom (the bowling ball held in the sling kept the lower part held against the wall, ) and we ran it up at enough of an angle, we could brace the top with 2 1' cross braces..


Posted by: zlgeraibegnst@mailinator.com on April 6, 2005 at 6:43 PM

The duct tape capacity in this setup will probably be based on the tensile strength of the tape itself, rather than the adhesive properties. With sufficient surface area and loading the tape in shear, the adhesive strength should exceed the tensile capacity of the tape. You can see for yourself using simple Scotch tape. Tape a strip with about 12" adhered to a desk, and pull in shear. The tape itself will break before the adhesive gives.


Posted by: bjorke on April 7, 2005 at 7:51 AM

You didn't say what the stress rating on the duct tape was -- it's made in a variety of strengths, depending upon the amount of fabric in the tape.


Posted by: adwb on April 10, 2005 at 7:02 PM

they have the same ceiling at WWU


Leave a comment


Subscribe to MAKE!Subscribe to MAKE Magazine!

Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.

$34.95 / 1 year
(4 Quarterly Issues)

Subscribe now


Void your warranty, violate a user agreement, fry a circuit, blow a fuse, poke an eye out. Make: The risk-takers, the doers, the makers of things... Welcome to Make: Online!


CRAFT Maker Shed Maker Faire MAKE television
MAKE: en EspaƱol MAKE: Japan


Check out all of the episodes of Make: television

Make: Science Room

Connect with MAKE

Be a MAKE fan on Facebook MAKE on Facebook
Visit our Facebook page and become a fan of MAKE!
MAKE on Twitter MAKE on Twitter
Follow our MAKE tweets!
MAKE Flickr Pool MAKE on Flickr
Join our MAKE Flickr Pool!
    make_tips on Twitter

    MAKE's RSS feed is here.
    Add MAKE to iGoogle - GoogleGoogle.
    How to add MAKE to your RSS reader - Real simple.
    Add MAKE on FriendFeed




    Maker SHED

    Advertise here with FM.

    Why advertise on MAKE?
    Read what folks are saying about us!

    Click here to advertise on MAKE!



    Subscribe to MAKE Magazine!

    Make: Online authors!

    Gareth BranwynGareth Branwyn
    Senior Editor


    Phillip TorronePhillip Torrone
    Senior Editor
    | AIM | Twitter


    Becky SternBecky Stern
    Associate Editor
    | AIM | Twitter


    Marc de VinckMarc de Vinck
    Contributing Writer
    | AIM | Twitter


    John ParkJohn Park
    Contributing Writer
    | Twitter


    Sean RaganSean Ragan
    Contributing Writer
    | Twitter


    Matt MetsMatt Mets
    Contributing Writer
    | AIM | Twitter


    Dale DoughertyDale Dougherty
    Editor & Publisher
    | Twitter


    Shawn ConnallyShawn Connally
    Managing Editor
    | Twitter


    Goli MohammadiGoli Mohammadi
    Associate Managing Editor

    Kip KayKip Kay
    Weekend Projects
    | AIM | Twitter


    Collin CunninghamCollin Cunningham
    Contributing Writer
    | AIM | Twitter

    Adam FlahertyAdam Flaherty
    Contributing Writer
    | AIM | Twitter



    More contributors: Mark Frauenfelder (Editor-in-Chief, MAKE magazine), Kipp Bradford (Technical Consultant/Writer), Chris Connors (Education), Diana Eng (Guest Author), Peter Horvath (Intern), Brian Jepson (O'Reilly Media), Robert Bruce Thompson (Science Room)

    Suggest a Site!

    Current Podcast

    itunesdl.gif Weekend Project: Making Char Cloth Learn how to make a cheap and effective fire starter made from an old t-shirt. To download The Char Cloth video click here and subscribe in iTunes. See Char Cloth in action with the Fire Piston from William Gurstelle.... More...

    Get the Make: Online sent via email
    Enter your email to receive Make: Online each day:



    MAKE Fascination video series brought to you by Dow

    Make: Education

    Important please read


    Subscribe to MAKE Magazine!

    Recent Posts from the Craft: Blog