RSS
The ELP Laser Turntable plays records by beaming the laser at the grooves (no needles touche the record). There are a total of five lasers: two for the left and right groove walls, two for tracking groove pitch, and one for tracking groove warp. Sounds amazing, until I saw it was $18,999. I think we'll need to a Make version! Link.
Play Records with a Laser
The ELP Laser Turntable plays records by beaming the laser at the grooves (no needles touche the record). There are a total of five lasers: two for the left and right groove walls, two for tracking groove pitch, and one for tracking groove warp. Sounds amazing, until I saw it was $18,999. I think we'll need to a Make version! Link.
Posted by Phillip Torrone |
May 12, 2005 01:07 PM
Home Entertainment |
Permalink
| Comments (4)
| Email This |
| Digg this!
Recent Entries
- 8-bit touch-sensitive handheld
- Cigar box music player
- The 'bike tree', an automatic storage system for cycles, can hold up to 6,000 bikes
- Building a folding table
- Maker Shed weekly wrap-up
- The Chumby has landed!
- Brainwave sofa by Unfold & Lucas Maassen
- Full MIDI drumset with Guitar Hero and Rock Band drums
- Hole punched art
- Portable induction accelerator
Comments
Oldest comments listed first.
Leave a comment
Subscribe to MAKE Magazine!
Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.
$34.95 / 1 year
(4 Quarterly Issues)
This is a really neat idea. Many years ago a couple of Brits came up with the exact same thing, using laser to read LP's and 45's. They quickly discovered that the old needle added something quite valuable: it shoves tiny dirt out of the way and 'rolls over' other very minor disturbances. The laser, however, sees all of these things and so it plays back the signal in what one could argue is essentially lower fidelity than a needle, unless you heavily filter the signal. Heavy filtering is typically a no-no in the world of music purists. I wonder how these guys solved the problem. A simple rotating brush with a vacuum or blower tube, maybe?
Reply to this comment
They haven't solved the problem as far as I know. I've been following these guys on audiophile websites for years and this device is a very poor implementation of this technology. People that have heard this have said that its a very low fidelity device. While it sounds like a great idea current state of the art old style vinyl playback technology beats this by a mile.
Reply to this comment
This type of player has appeared off and on since
the 1980s. As I recall, I heard one in the mid
eighties that had technology to read deep in the
groove where no needle had ever touched the vinyl.
It sold for about 2K$.
I'm not impressed
Smell
Reply to this comment
This is basically miniature 3d scanning. If you can get a very fine laser line it might work with a webcam (different optics of course).
Or use two webcams looking at the grooves at an angle. 3d mesh extraction and z-movement of the lens would be done in software.
Reply to this comment