RSS
RH writes- A pseudoscope is an optical instrument made with two prisms. The mirrors in the prisms reverse the image in each eye causing some items viewed through it to look quite unusual: convex objects become concave, things pointing towards you may look like they are pointing away and vice versa. This site describes more illusions that can be seen with it and how to make one for around ten dollars (holding up 2 $5 prisms). Link.
Make a Pseudoscope
RH writes- A pseudoscope is an optical instrument made with two prisms. The mirrors in the prisms reverse the image in each eye causing some items viewed through it to look quite unusual: convex objects become concave, things pointing towards you may look like they are pointing away and vice versa. This site describes more illusions that can be seen with it and how to make one for around ten dollars (holding up 2 $5 prisms). Link.
Posted by Phillip Torrone |
Jun 2, 2005 01:43 PM
Science |
Permalink
| Comments (8)
| Email This |
| Digg this!
Recent Entries
- Make: Holiday Gift Guide 2009: Mischief Maker's Gift Guide
- Grounding tips for mixed signal PCBs
- Virgil England's fantasy-land
- Novation Launchpad teardown
- Laptop Etch-a-Sketch via Arduino & Processing
- iPhone macro lens carousel
- New in the Maker Shed: OLLO kits
- BlueSMiRF found in credit card sniffer
- Mystery iPhone musical instrument - World's most expensive ocarina
- Stained glass d20s
Comments
Oldest comments listed first.
Leave a comment
Subscribe to MAKE Magazine!
Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.
$34.95 / 1 year
(4 Quarterly Issues)
Am I missing something, or does this not actually tell you anything about how to make one of these.
Reply to this comment
Phillip, is this for the next make issue? Or does the site not explain how to do it?
Reply to this comment
Makeblog says:
This site describes ... how to make one for around ten dollars.
Not quite.
Text from the site:
This site isn't about actually constructing a pseudoscope, but how to ... hold... two [ $5 ] prisms up to your eyes.
Reply to this comment
if there's interest, i'll build one and post it up here- the site has a diagram, what's needed as technicalvideo said- how to hold two $5 prisms up to your eyes...
Reply to this comment
the idea is cool, would be a great thing to show the local boys and girl scouts. (my step son and daughter)
Reply to this comment
The directions on how to build a pseudoscope are in Vol. 5 of Make Magazine (February 2006). The instructions are NOT very good - the dimensions are screwy because they don't resemble the drawing, a 5 1/16" measurement on the drawing is described as 5" on the materials list, they don't tell you where the two different sized mirrors go (they are the two end mirrors). Best to just google pseudoscope and see Rob Harmann's site - which is very good and he recommends using 3x6 mirrors for the larger ones rather than 3x4. Recommend you convert all these measurements on the drawing to measures from the two centerlines of your base - then you can use any size base so long as it is at least 5x12.
Reply to this comment
The directions on how to build a pseudoscope are in Vol. 5 of Make Magazine (February 2006). The instructions are NOT very good - the dimensions are screwy because they don't resemble the drawing, a 5 1/16" measurement on the drawing is described as 5" on the materials list, they don't tell you where the two different sized mirrors go (they are the two end mirrors). Best to just google pseudoscope and see Rob Harmann's site - which is very good and he recommends using 3x6 mirrors for the larger ones rather than 3x4. Recommend you convert all these measurements on the drawing to measures from the two centerlines of your base - then you can use any size base so long as it is at least 5x12.
Reply to this comment
Thanks for the feedback on the article in Make Magazine, overall I was happy with it, although some of the dimensions were wrong. Please see my web site for the correct ones:
http://pseudoscope.blogspot.com/
It's a good idea to have the dimensions from the centerline instead of the edges of the base, I'll fix that when I get time.
Hope you enjoy the project,
Rob Hartmann
Reply to this comment