Portable Rotary Phone - pre-review

416
I've been having a lot of fun with the Portable Rotary Phone from Spark Fun Electronics. It's a GSM cell phone built inside an old rotary phone. You pop your SIM card in, it dials out, rings and acts just like an old fashion phone, but it's now my full time cell phone. I'll have a full review of it up soon, and will be using it at Gnomedex this week in Seattle. For now- check out the photos and video I shot so far...




Click here to see the phone in the car in use (QuickTime MOV).

Click here to see the phone in the driveway in use (QuickTime MOV).

Dsc05234
The new-old car phone.

Dsc05237
Handy to carry.

Dsc05242
Taken apart.

Dsc05243

Dsc05244

Dsc05245

Dsc05246

Portable Rotary Phone
Fully functional Portable Rotary Phone! Phone comes fully assembled and tested. All you have to do is open the phone, insert your SIM card, and turn the unit on. The unit will utilize your phone number and account minutes. Phone can dial out using the rotary and will ring with the original metal bells with an incoming call.The battery can run the phone for 5-6 hours and is charged by unscrewing two screws on the bottom of the phone, opening it, and attaching the charger.
Phone comes with:

  • Main controller board
  • Ringer module
  • 2000mAh Lithium-Polymer battery
  • Li-Po battery charger (3-prong 110V only)
  • Mini-cellular antenna (compatible with North American Frequencies only)
  • GM862 cellular module

Visit the Spark Fun site for more info and check back later for our full review!

Posted by Phillip Torrone | Jun 20, 2005 12:17 AM
| Permalink | Comments (13)

Recent Entries

Comments

Oldest comments listed first.


  • Ha!, that's cool. I've wanted to build one of those since forever-ago, just as a statement about the nasty ergonomics of modern cellphones and the timelessness of good design.

    Those pictures remind me of the old phone phreak days, when I was in highschool, modifying Bell 500 sets and their kin for various functions you couldn't get in residential service decades ago. Nice thing about the classic phone sets is that they could be modded like crazy and had plenty of space for circuit boards, relays, and suchlike. The 2500 series touchtone sets are still available (Cortelco, made in USA), about $50 each new, or check your local electronics surplus store or flea market for used ones.

    Posted by: gg2 on June 20, 2005 at 1:04 AM

  • SparkFun is a great place for Make type folks - good tutorials and a great source for microcontroller and wireless projects. And as you can see with this phone, they have a good time.

    Posted by: ray@teamwidget.com on June 20, 2005 at 10:36 AM

  • Cell phone manufacturers are trying too hard to win a customer. Some are paying out the bloggers to blog their phones. Some are turning out different looking phones. One commentator said that it is a rotory cellphone. I don't see why would one buy a rotory cell phone. But I do think everybody would buy a cellphone that could surf a web without having a 802.11b or 802.11n laptop that has to be taken to a wi-fi hot spot. All that has to be done is to redevelop a method of deliverying the internet service so that it is no longer necessary for the server to send the data to a client. In such a case a cellphone, that can send htext messages, can be used as a client. The matter is discussed at the following blog:

    http://www.wirelessera.blogspot.com

    Posted by: newerawisp on July 5, 2005 at 3:57 PM

  • I remember i have this phone when i was young, sometime it is hard to dial the number you want.

    http://www.motorolav190.com

    Posted by: hellocalls on February 9, 2006 at 8:53 AM

  • Whaoow...
    Really cool, need to get my hands on one of these
    old phones. And then let the modding begin. :)

    Best regards
    David - Sweden
    http://www.vaga-le.se

    Posted by: David_Swe on June 11, 2006 at 8:40 AM

  • Whaoow...
    Really cool, need to get my hands on one of these
    old phones. And then let the modding begin. :)

    Best regards
    David - Sweden
    http://www.vaga-le.se

    Posted by: David_Swe on June 11, 2006 at 8:41 AM

  • Yes. There was nothing better than the big old heavy handset. I am sure they would NOT allow that phone on an airplane.

    It may not have the electronics (pre-upgrade), however someone could be used it effectively as a club. That's a bad thing. :)

    But I would like one for my car...maybe you could start refurbishing old handsets with modern technology.

    How about turning a Motorola BC-611 Walkie Talkie into a cell phone?

    Motorola BC-611 Walkie Talkie
    http://72.9.241.50/~wa4kcy/page3.htm

    Sure, it would be kind of heavy to pack around, but it would look great hanging off your belt.

    I feel better now. Thanks. ;)

    James

    Posted by: cell_phone_guy on August 15, 2006 at 3:55 PM

  • Really great! I can't imagine why you would want to carry around that big thing, but I think it is so cool that you made it a mobiel phone!

    Posted by: CellphoneSavant on September 20, 2006 at 6:01 PM

  • HaHa that is just too cool and funny.... Old school mobile!!

    Posted by: LG_Chocolate_Phone_Freak on December 24, 2006 at 4:18 PM

  • I will try to get this to work on an old 1950's British Bakelite telephone like the one on my web site http://bakelite.fortunecity.com/ I will post photographs when I get it working. Thanks for the idea :-)

    Posted by: Bakelite on July 29, 2007 at 4:51 AM

  • I will try to get this to work on an old 1950's British Bakelite telephone like the one on my web site http://bakelite.fortunecity.com/ I will post photographs when I get it working. Thanks for the idea.

    Posted by: Bakelite on July 29, 2007 at 4:52 AM


Your comment will be posted in the background and may take a few minutes to appear on the site; you do not need to re-post.

Allowable html: a href,br/,p,b,strong,em,i,ol,ul,li,blockquote,pre

Name:

Comment:


Please enter the security code you see here

Subscribe to MAKE!Subscribe to MAKE Magazine!

Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.

$34.95 / 1 year
(4 Quarterly Issues)

Subscribe now

How-to videos for Makers and Crafers!


Void your warranty, violate a user agreement, fry a circuit, blow a fuse, poke an eye out... Welcome to the Make Blog!

Features and more @ MAKE!

MAKE @ The NYC Toy Fair 2008 - Covering DIY!
HOW TO - Build the arms of assistance.

MADE in Japan - Part I.
MADE in Japan - Part II.
MADE in Japan - Part III.

Make store - Blinky bug kit - Blink!
Make store - Loud Objects Noise Toy Kit

Makers - MAKE Flickr pool contest. Win cool stuff!
Makers - Join the MAKE Facebook page - Meet other makers.
MAKE on Twitter - Tweet! Tweet!
What you're reading in MAKE - Data!
Add MAKE to your RSS reader - Real simple.


Advertise here with FM.

Why advertise on MAKE?
Read what folks are saying about us!

Click here to advertise on MAKE!

Subscribe to MAKE Magazine!


Phillip Torrone.Phillip Torrone
Senior Editor
Tel: 707-827-7311


Gareth BranwynGareth Branwyn
Robot Maker


Jonah Brucker-Cohen Jonah Brucker-Cohen
Researcher

Suggest a Site!

Natalie Zee DrieuNatalie Zee Drieu
Senior Editor
CRAFT


Becky Stern Becky Stern
Culture jammer


Collin CunninghamCollin Cunningham
Sound Maker


Marc de Vinck Marc de Vinck
CNC Maker

Current Podcast

itunes_p.jpg AHAB High Altitude Ballooning - Best of Weekend Projects mp4|mov|hd|3gp|3g2|itunes This week on Best of Weekend Projects, we look back at part two of the AHAB (High Altitude Balloon Adventure). In this epic Bre & Co. travel to Eastern Washington to launch a GPS and camera enabled balloon... More...

Get the Make blog sent via email

Enter your email to receive the Make blog each day:



WOW! Thanks to everyone involved with Maker Faire Austin: attendees, makers, exhibitors, sponsors, volunteers, and crew...it was AMAZING! Over 350 Makers and 20,000 attendees! Be sure to check out the photos @ Flickr, and our Maker Faire posts for all the action! Next year, scheduled Maker Faire's are: Bay Area: May 3rd & 4th, 2008 - San Mateo County Fairgrounds and Austin: Oct. 18th & 19th, 2008 - Travis County Expo Center!

Make Categories

www.flickr.com
photos in MAKE More photos in MAKE Flickr Pool
www.flickr.com
photos in Craft More photos in Craft Flickr Pool

Advertise here.
Why advertise on MAKE?
Read what folks are saying about us!

Click here to advertise on MAKE!
Subscribe to MAKE Magazine!

Recent Projects

From the Instructables MAKE group


Important please read

Recent Posts from the Craft: Blog

Recent Posts from the Hackszine Blog