RSS
MAKE: Amends for issue 02: Page 116, 3b should read: "Reconnect the capacitor, switch the meter to DC voltage, turn off the input signal, and measure across the capacitor. Ours read 74 volts (V). The voltage rating on the capacitor is 75 volts, so there is not much margin in this old amp." The title for the "Testing current/amperage" figure should be "Testing BFC current". The title for "Testing Voltage" should be "Testing Output Current". Link.
Resurrecting this old amp update
MAKE: Amends for issue 02: Page 116, 3b should read: "Reconnect the capacitor, switch the meter to DC voltage, turn off the input signal, and measure across the capacitor. Ours read 74 volts (V). The voltage rating on the capacitor is 75 volts, so there is not much margin in this old amp." The title for the "Testing current/amperage" figure should be "Testing BFC current". The title for "Testing Voltage" should be "Testing Output Current". Link.
Posted by Phillip Torrone |
Jun 17, 2005 12:01 AM
|
Permalink
| Comments (0)
| Email This |
| Digg this!
Recent Entries
- Stained glass d20s
- CRAFT Thanksgiving roundup
- 3D renderings of the Mandelbrot set
- New in the Maker Shed: Microbe Motel kit
- Science through graphic novels
- Tiny solar-powered brass engine in a wineglass
- Maker Shed kiosks at Fry's
- New hackerspace in Chicagoland: Workshop 88
- Mint tin electronics dev kit packs the essentials
- Olympus BioScapes competition winners
Leave a comment
Subscribe to MAKE Magazine!
Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.
$34.95 / 1 year
(4 Quarterly Issues)
