RSS
The process starts with the use of a 'Magic Ingredient', a water-soluble solder paste. This 'Magic Ingredient' is available though DigiKey and is made by Kester Solders. Buying of the product in itself is interesting as it must be kept refrigerated and will only be delivered if ordered for overnight delivery. Since the material is water based it must be stored in a cold place (refrigerator) and only 'keeps' for a few months. Starting with a clean board, the solder paste is applied from the syringe. The paste comes pre-loaded into a syringe however, the reader must order the plunger for the syringe and the applicator tips separately. Link.
Solder surface mount parts with a toaster oven...
The process starts with the use of a 'Magic Ingredient', a water-soluble solder paste. This 'Magic Ingredient' is available though DigiKey and is made by Kester Solders. Buying of the product in itself is interesting as it must be kept refrigerated and will only be delivered if ordered for overnight delivery. Since the material is water based it must be stored in a cold place (refrigerator) and only 'keeps' for a few months. Starting with a clean board, the solder paste is applied from the syringe. The paste comes pre-loaded into a syringe however, the reader must order the plunger for the syringe and the applicator tips separately. Link.
Posted by Phillip Torrone |
Jun 17, 2005 12:04 AM
|
Permalink
| Comments (2)
| Email This |
| Digg this!
Recent Entries
- How-To: Cryptex
- Is the Leatherman Fuse a dud?
- EV dragsters!
- Party with Barbot the bartender robot
- Greenhouse made of glass negatives
- Visualize your heartbeat by gluing a straw to your neck
- ATtiny2313 breakout board v1.1
- Frayed Wire, Seattle, Saturday, July 11th
- Peter Semmelhack, of Bug Labs, on "Hacking Health"
- Interactive LED wall in Montreal
Comments
Oldest comments listed first.
Leave a comment
Subscribe to MAKE Magazine!
Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.
$34.95 / 1 year
(4 Quarterly Issues)
"Reflow Soldering" with a toaster oven is not uncommon. I'm not sure why they use solder paste which needs to be stored refrigerated. It is common to use just plain "normal" solder paste, which can be kept for about half an year at room temperature.
Reply to this comment
See also Build an SMT Reflow Oven Controller from Circuit Cellar, July 2004, Issue 168.
Reply to this comment