RSS
Change the color of the Apple on a PowerBook. You will need a hex wrench (I didn't really pay attention to the size), and a credit card type device. You need to use your hex wrench to unscrew the 2 screws on the bottom of of the display. The angle is really bad so you may need to us a smaller size hex than the screws use so you can get at them from an angle. The screws are not in very tight but be careful, you don't want to strip them or scratch them up too much. Link.
Color your PowerBook
Change the color of the Apple on a PowerBook. You will need a hex wrench (I didn't really pay attention to the size), and a credit card type device. You need to use your hex wrench to unscrew the 2 screws on the bottom of of the display. The angle is really bad so you may need to us a smaller size hex than the screws use so you can get at them from an angle. The screws are not in very tight but be careful, you don't want to strip them or scratch them up too much. Link.
Posted by Phillip Torrone |
Jul 23, 2005 12:52 AM
|
Permalink
| Comments (0)
| Email This |
| Digg this!
Recent Entries
- 3D renderings of the Mandelbrot set
- New in the Maker Shed: Microbe Motel kit
- Science through graphic novels
- Tiny solar-powered brass engine in a wineglass
- Maker Shed kiosks at Fry's
- New hackerspace in Chicagoland: Workshop 88
- Mint tin electronics dev kit packs the essentials
- Olympus BioScapes competition winners
- Mac mailbox
- LHC tweets its first circulating beam of 2009
Leave a comment
Subscribe to MAKE Magazine!
Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.
$34.95 / 1 year
(4 Quarterly Issues)
