RSS
Here's a HOW TO on making those sturdy board books people tend to give kids when they're younger...Cut 5"x5" boards from pressed cardboard. I used Bienfang illustration board but any pressed (not corrugated) cardboard that's about 1/16" thick will do. You'll need enough for the interior pages, plus the front and back cover. Round two of the corners...To protect the pages from smudging, cover them with clear adhesive sheets. I used JM laminating sheets. Link.
DIY kid's Board Book
Here's a HOW TO on making those sturdy board books people tend to give kids when they're younger...Cut 5"x5" boards from pressed cardboard. I used Bienfang illustration board but any pressed (not corrugated) cardboard that's about 1/16" thick will do. You'll need enough for the interior pages, plus the front and back cover. Round two of the corners...To protect the pages from smudging, cover them with clear adhesive sheets. I used JM laminating sheets. Link.
Posted by Phillip Torrone |
Jul 24, 2005 01:49 AM
|
Permalink
| Comments (0)
| Email This |
| Digg this!
Recent Entries
- In the Makers Market: LED hula hoop kits
- Aquabike!
- 3D-printable buckydome brackets
- Print-your-own 35mm pinhole camera
- Paralyzed Graffiti Artist Draws With His Eyes @NPR
- In the Makers Market: Posc pocket audio oscillator kit
- Flame: A cool Processing-based art program
- Arduino meet up (photos)
- Electronic business card demonstrates transistor amplification
- Gentlemakers, start your robots!
Leave a comment
Subscribe to MAKE Magazine!
Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.
$34.95 / 1 year
(4 Quarterly Issues)
