RSS
With the application of a knife along the seam on the side and top of the device, the use of tweezers to hold the newly-formed gap open, the use of another pair of tweezers to reach in and grab the antenna, and the replacing of the rubber insulating plug on the side of the iTrip to seal the casing back up, I was able to fully extend the antenna out the side of the iTrip at a healthy 90º angle with almost no scarring of the case. Link.
Extending the iTrip's Range (Round 2)
With the application of a knife along the seam on the side and top of the device, the use of tweezers to hold the newly-formed gap open, the use of another pair of tweezers to reach in and grab the antenna, and the replacing of the rubber insulating plug on the side of the iTrip to seal the casing back up, I was able to fully extend the antenna out the side of the iTrip at a healthy 90º angle with almost no scarring of the case. Link.
Posted by Phillip Torrone |
Aug 2, 2005 12:06 AM
Portable Audio and Video |
Permalink
| Comments (0)
| Email This |
| Digg this!
Recent Entries
- BlueSMiRF found in credit card sniffer
- Mystery iPhone musical instrument - World's most expensive ocarina
- Stained glass d20s
- CRAFT Thanksgiving roundup
- 3D renderings of the Mandelbrot set
- New in the Maker Shed: Microbe Motel kit
- Science through graphic novels
- Tiny solar-powered brass engine in a wineglass
- Maker Shed kiosks at Fry's
- New hackerspace in Chicagoland: Workshop 88
Leave a comment
Subscribe to MAKE Magazine!
Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.
$34.95 / 1 year
(4 Quarterly Issues)
