This article will show you how to make your own microphone pop-filter. A pop-filter is a small screen that goes between a microphone and your mouth to prevent sharp popping sounds (known as plosives) like “P” and “B” words from overloading the mic level and distorting. Commercially available pop-filters are expensive and can often cost 20 dollars or more. The pop-filter you can build here will cost less than $6 dollars. Link.
HOW TO Make Your Own $6 Microphone Pop-Filter
This article will show you how to make your own microphone pop-filter. A pop-filter is a small screen that goes between a microphone and your mouth to prevent sharp popping sounds (known as plosives) like “P” and “B” words from overloading the mic level and distorting. Commercially available pop-filters are expensive and can often cost 20 dollars or more. The pop-filter you can build here will cost less than $6 dollars. Link.
Recent Entries
- New in the Maker Shed: OLLO kits
- BlueSMiRF found in credit card sniffer
- Mystery iPhone musical instrument - World's most expensive ocarina
- Stained glass d20s
- CRAFT Thanksgiving roundup
- 3D renderings of the Mandelbrot set
- New in the Maker Shed: Microbe Motel kit
- Science through graphic novels
- Tiny solar-powered brass engine in a wineglass
- Maker Shed kiosks at Fry's
Comments
Oldest comments listed first.
Leave a comment
Subscribe to MAKE Magazine!
Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.
$34.95 / 1 year
(4 Quarterly Issues)




































Beat me to it! I recently built two of these for my podcast ( alifelessordinary.com )and was in the process of writing up the HOW TO. Alas. The two main differences in my design were that I used plastic embroidery rings (because the wooden ones are thin and a bit dodgy), and I tried to more closely emulate a gooseneck with the use of copper grounding wire. They're not as nice as the professional ones, but they're certainly better than nothing.
Reply to this comment