RSS
One of the complaints about the first-generation PowerBook G4 is that the rubber feet easily wear down/tear off leaving the owner with a very hot machine that sits directly on the table. Not good for the table, not good for the machine. Here's a HOW TO on replacing them, cheaply... Link.
HOW TO replace lost PowerBook G4 feet on the cheap
One of the complaints about the first-generation PowerBook G4 is that the rubber feet easily wear down/tear off leaving the owner with a very hot machine that sits directly on the table. Not good for the table, not good for the machine. Here's a HOW TO on replacing them, cheaply... Link.
Posted by Phillip Torrone |
Aug 18, 2005 01:52 AM
DIY Projects |
Permalink
| Comments (1)
| Email This |
| Digg this!
Recent Entries
- Tiny solar-powered brass engine in a wineglass
- Maker Shed kiosks at Fry's
- New hackerspace in Chicagoland: Workshop 88
- Mint tin electronics dev kit packs the essentials
- Olympus BioScapes competition winners
- Mac mailbox
- LHC tweets its first circulating beam of 2009
- Building a shop presence notification system
- Vacuum tube prototyping board
- Free LED Cookbook from TI
Comments
Oldest comments listed first.
Leave a comment
Subscribe to MAKE Magazine!
Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.
$34.95 / 1 year
(4 Quarterly Issues)
Apple offers original feet from their support website:
http://www.apple.com/support/powerbook/doityourself/15al/
Call 1-800-APL-CARE.
Reply to this comment