RSS
Sven writes "About a year ago, inspired by other projects like Afrotech's Hard-disk Sound System, I built a first version of my harddisk speaker. The first one was just a very quick hack to see if it would work and was destroyed due to too much power melting the coils and cables. We hooked it up to a 50W guitar amp and pushed the volume a bit to far... Since it sounded really great, I decided to build a second one." Link.
Make speakers from hard drives...
Sven writes "About a year ago, inspired by other projects like Afrotech's Hard-disk Sound System, I built a first version of my harddisk speaker. The first one was just a very quick hack to see if it would work and was destroyed due to too much power melting the coils and cables. We hooked it up to a 50W guitar amp and pushed the volume a bit to far... Since it sounded really great, I decided to build a second one." Link.
Posted by Phillip Torrone |
Nov 2, 2005 05:46 AM
Electronics, Music |
Permalink
| Comments (1)
| Email This |
| Digg this!
Recent Entries
- Make: Holiday Gift Guide 2009: Mischief Maker's Gift Guide
- Grounding tips for mixed signal PCBs
- Virgil England's fantasy-land
- Novation Launchpad teardown
- Laptop Etch-a-Sketch via Arduino & Processing
- iPhone macro lens carousel
- New in the Maker Shed: OLLO kits
- BlueSMiRF found in credit card sniffer
- Mystery iPhone musical instrument - World's most expensive ocarina
- Stained glass d20s
Comments
Oldest comments listed first.
Leave a comment
Subscribe to MAKE Magazine!
Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.
$34.95 / 1 year
(4 Quarterly Issues)
If the videos on this link are anything like the ones from Afroman's original project, you really should check them out. I've been dying to make a set of these for my cube at work.
Reply to this comment