RSS
"The nitrogen laser will give 100kW pulses of light at 337.1nm (UVA light). The pulses are only 6ns long, so the energy per pulse is just 0.6mJ. It is a very simple laser, and it does not require mirrors or glass working at all! But using a mirror at one end of the laser will boost the output to over 250%. And if the nitrogen entering the laser (it is a flowing gas laser, but it can be made sealed) is cooled, it can go up to 120 pps. So if it is running at 120 pps, and has a mirror at one end, the average power output will be 180 mW. Although the beam is invisible it can be used to pump dye lasers to give beams with wavelengths ranging from infrared to ultraviolet." Link.
The Homemade Nitrogen Laser
"The nitrogen laser will give 100kW pulses of light at 337.1nm (UVA light). The pulses are only 6ns long, so the energy per pulse is just 0.6mJ. It is a very simple laser, and it does not require mirrors or glass working at all! But using a mirror at one end of the laser will boost the output to over 250%. And if the nitrogen entering the laser (it is a flowing gas laser, but it can be made sealed) is cooled, it can go up to 120 pps. So if it is running at 120 pps, and has a mirror at one end, the average power output will be 180 mW. Although the beam is invisible it can be used to pump dye lasers to give beams with wavelengths ranging from infrared to ultraviolet." Link.
Posted by Phillip Torrone |
Nov 21, 2005 01:30 AM
DIY Projects, Science |
Permalink
| Comments (1)
| Email This |
| Digg this!
Recent Entries
- 8-bit touch-sensitive handheld
- Cigar box music player
- The 'bike tree', an automatic storage system for cycles, can hold up to 6,000 bikes
- Building a folding table
- Maker Shed weekly wrap-up
- The Chumby has landed!
- Brainwave sofa by Unfold & Lucas Maassen
- Full MIDI drumset with Guitar Hero and Rock Band drums
- Hole punched art
- Portable induction accelerator
Comments
Oldest comments listed first.
Leave a comment
Subscribe to MAKE Magazine!
Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.
$34.95 / 1 year
(4 Quarterly Issues)
This appears to be a nifty HV power supply, but I don't actually see any laser; the end of the page just says "to be continued".
If you want to build a nitrogen laser, here's a design that puts out a little over 100 kW:
http://www.jossresearch.org/lasers/nitrogen/dkdiy.html
...and I'm currently working on another one, which should be considerably more powerful.
Best --
jon
Reply to this comment