RSS
Carpespasm writes "it seems that all shower mfgs have had to comply with low flow regulation for a while now, but my shower was choked down too low to be enjoyable. so what to do? modify it of course! first i took the whole thing apart, and looked for the areas with the lowest flow. upon inspection, it turned out to be several places. i have one of those "head on a hose" shower heads, and there were restrictors on the ends of the hose, in the swivel mount, and in the head itself." Link.
DIY shower modification
Carpespasm writes "it seems that all shower mfgs have had to comply with low flow regulation for a while now, but my shower was choked down too low to be enjoyable. so what to do? modify it of course! first i took the whole thing apart, and looked for the areas with the lowest flow. upon inspection, it turned out to be several places. i have one of those "head on a hose" shower heads, and there were restrictors on the ends of the hose, in the swivel mount, and in the head itself." Link.
Posted by Phillip Torrone |
Jan 20, 2006 04:48 AM
DIY Projects |
Permalink
| Comments (3)
| Email This |
| Digg this!
Recent Entries
- The 'bike tree', an automatic storage system for cycles, can hold up to 6,000 bikes
- Building a folding table
- Maker Shed weekly wrap-up
- The Chumby has landed!
- Brainwave sofa by Unfold & Lucas Maassen
- Full MIDI drumset with Guitar Hero and Rock Band drums
- Hole punched art
- Portable induction accelerator
- Make: Halloween Contest 2009 - WINNERS!
- Telescope camera mod
Comments
Oldest comments listed first.
Leave a comment
Subscribe to MAKE Magazine!
Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.
$34.95 / 1 year
(4 Quarterly Issues)
Dang.
Last time I had to do this, there was a single restrictor, in the house, and the paperwork for the showerhead actually told me where it was, what it was for, and how I would be breaking the law if I were to happen to unscrew the hose, remove the restrictor and reassemble the unit.
Reply to this comment
Doh. Not in the "house"! In the "hose"! I mean, techinically, it was in the house, too, and I did remove the restrictor from the house, but that really wasn't the interesting part of the project...
Reply to this comment
I have a teledyne low flow shower head, and it does seem to use the water more efficiently. Most of these shower heads were designed for higher flow rates, and they obstruct the flow in the most brutal way possible so the water is slowed down. If you aren't going to use much water, you want the speed the water hits you to be as fast as possible.
Reply to this comment