RSS
eReader for the DS hack! "As can be seen in the following pictures, the eReader will not fit into the Nintendo DS due to the way the linkport connector is arranged, for the original Gameboy advance system. You will need the following tools to disassemble and modify the eReader. Tri-Wing driver (It is also possible to use a precision slotted driver to remove the screws). #0 philips driver (Again, a precision slotted driver can be used here.). Some form of cutting tool. (xacto knife, rotary tool) (only if you need the eReader link port connector for the original gameboy advance.)" [via] Link.
HOW TO - DS eReader modification
eReader for the DS hack! "As can be seen in the following pictures, the eReader will not fit into the Nintendo DS due to the way the linkport connector is arranged, for the original Gameboy advance system. You will need the following tools to disassemble and modify the eReader. Tri-Wing driver (It is also possible to use a precision slotted driver to remove the screws). #0 philips driver (Again, a precision slotted driver can be used here.). Some form of cutting tool. (xacto knife, rotary tool) (only if you need the eReader link port connector for the original gameboy advance.)" [via] Link.
Posted by Phillip Torrone |
Jan 21, 2006 12:01 AM
DIY Projects, Electronics, Gaming |
Permalink
| Comments (0)
| Email This |
| Digg this!
Recent Entries
- Stained glass d20s
- CRAFT Thanksgiving roundup
- 3D renderings of the Mandelbrot set
- New in the Maker Shed: Microbe Motel kit
- Science through graphic novels
- Tiny solar-powered brass engine in a wineglass
- Maker Shed kiosks at Fry's
- New hackerspace in Chicagoland: Workshop 88
- Mint tin electronics dev kit packs the essentials
- Olympus BioScapes competition winners
Leave a comment
Subscribe to MAKE Magazine!
Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.
$34.95 / 1 year
(4 Quarterly Issues)
