RSS
Sensational Nightingale's writes - "$5 homemade bracket for mounting xm radio. My wife's dashboard doesn't have a single flat surface for mounting with double-sided tape. The radio manual recommends buying an aftermarket bracket: I found one for $40, but could not bear to pay so much for a little piece of metal. I bought a small sheet of 22 gauge steel from Lowe's, cut it with snips, bent it in my vise, and drilled a few holes. " - Link.
DIY XM bracket
Posted by Phillip Torrone |
Jun 28, 2006 12:47 PM
DIY Projects |
Permalink
| Comments (0)
| Email This |
| Digg this!
Recent Entries
- In the Makers Market: LED hula hoop kits
- Aquabike!
- 3D-printable buckydome brackets
- Print-your-own 35mm pinhole camera
- Paralyzed Graffiti Artist Draws With His Eyes @NPR
- In the Makers Market: Posc pocket audio oscillator kit
- Flame: A cool Processing-based art program
- Arduino meet up (photos)
- Electronic business card demonstrates transistor amplification
- Gentlemakers, start your robots!
Leave a comment
Subscribe to MAKE Magazine!
Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.
$34.95 / 1 year
(4 Quarterly Issues)
