RSSWorkbench - made
Posted by Phillip Torrone |
Jul 10, 2006 07:34 AM
DIY Projects |
Permalink
| Comments (3)
| Email This |
| Digg this!
Recent Entries
- Homebrew solar light
- EmbeddedSPARK 2010 Challenge
- A breadboard for your groaning board
- Jonathan Wolfe's puzzle acorns
- Make: Holiday Gift Guide 2009: DIY photography
- Dance of the Christmas Robots
- SPARK Project #3, Post #2
- Sparkfun's free day January 7th
- DIY capacitive pressure sensor tile
- Paxtruder
Comments
Oldest comments listed first.
Leave a comment
Subscribe to MAKE Magazine!
Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.
$34.95 / 1 year
(4 Quarterly Issues)
I too made this fine bench over the weekend. It's really solid and the design is top notch!
There is so little lumber left over - it's really cool.
I found a can of stain/urethane at the local "lots" store for $3 so now it has a nice finish on the top
Thanks for the design!!
Reply to this comment
I too made this fine bench over the weekend. It's really solid and the design is top notch!
There is so little lumber left over - it's really cool.
I found a can of stain/urethane at the local "lots" store for $3 so now it has a nice finish on the top
Thanks for the design!!
Reply to this comment
Fantastic!
One quick addition that might become usefull is to put a cross brace along the backside. If you find over time that is starts to get a little wobbly from side to side, the diagonal cross brace will help. Best of luck making stuff on it!
Reply to this comment