RSS
woodblock100 writes -
"I needed a teleprompter to help me make better looking videos for my website on woodblock printmaking, so I built this one, using nothing but a few pieces of scrap wood and glass, and only free software.
When recording videos, I discovered that I'm not much of an actor ... namely, I can't remember my lines! I tried to get around this by printing out a large-type 'script' and hanging it up next to the camera, but when I looked at the resulting video, it was obvious that I was reading something, and not looking directly into the camera. There was only one solution ... build a teleprompter!
Here's how I did it, in just a few minutes, using a couple of scraps of wood, a scavenged piece of glass, and an old shirt ..." - Link.
Related:
- DIY Plasti-Prompter - Link.
From the pages of MAKE:
- No More Cue Cards - Make a teleprompter with a laptop, a sheet of glass, and some scrap wood. MAKE 02 - Page 146. Subscribers--read this article now in your digital edition!
Hey, I had a similar design concept, but mine was for a laptop + isight/other usb/firewire camera. Check it out here:
http://sc-fa.com/?p=71
-steve
Reply to this comment
That's really great. I think it would be good for podcasts, as well, if one had a script. Thats for posting this--I'm sure I'll find a use for it someday.
Reply to this comment
That's really great. I think it would be good for podcasts, as well, if one had a script. Thanks for posting this--I'm sure I'll find a use for it someday.
Reply to this comment
Well done!
Reply to this comment
I had a student last year who made a similar teleprompter set up for our studio. two monitors running through a vga splitter laying flat perpendicular to the camera, and a one-way mirror up to the camera at a 45 degree angle. Change the white balance a little and its completely functional.
Reply to this comment
Your teleprompter was one of the starting points for the one that I build.
Check it out here http://equipment-notes.blogspot.com/2007/03/diy-autocue.html
Anybody find a source for half-silvered mirrors?
Richard
Reply to this comment