RSSGuitar Hero/ Funde Razor
Our friend Joel is looking for some modding help for Penny Arcade's Child's Play charity, he writes -
"Howdy, Makers. In early December of this year we'll be holding the second-annual Fünde Razor (http://funderazor.com), a charity event that raises money for Penny Arcade's Child's Play charity. Last year we raised over $1,600 and this year I'm hoping we can double it.
The main money-raising method at Fünde Razor is a raffle. Last year we gave away an Xbox 360, while this year we intend to have at least one Nintendo Wii and a Playstation 3. (If I can get one; Both Nintendo and Sony are very stingy with donations because of hardware shortages.)
This year I'd really like to have, in addition to other donated raffle items, a very special item crafted especially for the event. See, at Fünde Razor, the main activity is playing Guitar Hero. This year I hope to have at least one hand-made GH controller built into the body of a real guitar, connected wirelessly to the Playstation 2 running the game. (We set up a huge projector in the bar while the rest of the attendees gather around the players and cheer them on; It's awesome.)
Here is an example of someone having done what I'm thinking of...
It's beyond my ability, I'm afraid, especially considering all the other stuff I've got to get together to make the event happen. I was hoping that I might entice a Maker to craft the custom controller to be raffled for charity after being used at the event; I'd be more than happy to pay for all parts and shipping, should you be unable to attend the event in Brooklyn.
If anyone has any modding ideas beyond putting a GH controller in a real guitar body, I'd be happy to consider funding those, too!
Thanks, folks." - Link.
If any Maker helps out, I'll throw in something from the MAKE store too.
Posted by Phillip Torrone |
Nov 14, 2006 07:54 PM
Announcements |
Permalink
| Comments (4)
Recent Entries
- HOW TO - build a water mortar
- Jake's steamcar project, dashboard redo
- Build your own water quality tester
- MAKE @ Yahoo! Buzz
- Made in Japan Vol. 3
- Super Breakout version allows for competitive or collaborative gaming
- How DIYers just might revive American innovation
- Light-Field camera makes blurry images a thing of the past
- Make a pizza box solar oven
- DIY Security system calls your phone
Comments
Oldest comments listed first.
How about taking the audio out of a standard guitar and turning that into some control signals. You'd need a filter bank and some 555's to give you clean pulses when a certain note is played. You could also get a 'hex-pickup'(MIDI Pickup) or an already MIDI-enabled guitar(CASIO used to make a decent strat-style that you can usually find on eBay.. or get a Godin XTSa :)). You could probably convert the MIDI to a PS2 controller fairly easily...
Just a few thoughts... No time to actually do it :)
The Yamaha EZ-EG (http://www.amazon.com/Yamaha-EZ-EG-Tutorial-Electric-Guitar/dp/B00009UVQZ/sr=8-2/qid=1163642107/ref=sr_1_2/103-0089057-6231019?ie=UTF8&s=electronics) outputs MIDI, including low-velocity note-on signals when its fret buttons are pressed, and it uses strum "pickups" that emulate the strings of a guitar. I was pleasantly surprised to see this post today, as just a couple of days ago I started a project using an Arduino board (http://www.arduino.cc) to filter the MIDI input from an EZ-EG and output signals similar to what the Guitar Hero controller sends to the PS2. I wanted a custom GH controller but didn't want to wreck a perfectly usable guitar to make one, and supposedly the EZ-EG sends fairly clean MIDI note data (I don't have one myself yet, but I have ordered one). Since it sends each string's note data on a seperate channel, it should be a fairly simple task to make an open source board based on the Arduino design that homebrewers could easily put together themselves in order to use the EZ-EG (or any other MIDI device, really) to control Guitar Hero. I don't know if I'll have time to finish the project in time for the Funde Razor, but it sounds like a pretty cool event so perhaps someone with more time and electronics experience could make something similar. Anyone who wants to collaborate or comment can email me at rictus (at) gmail.
The Yamaha EZ-EG (http://www.amazon.com/Yamaha-EZ-EG-Tutorial-Electric-Guitar/dp/B00009UVQZ/sr=8-2/qid=1163642107/ref=sr_1_2/103-0089057-6231019?ie=UTF8&s=electronics) outputs MIDI, including low-velocity note-on signals when its fret buttons are pressed, and it uses strum "pickups" that emulate the strings of a guitar. I was pleasantly surprised to see this post today, as just a couple of days ago I started a project using an Arduino board (http://www.arduino.cc) to filter the MIDI input from an EZ-EG and output signals similar to what the Guitar Hero controller sends to the PS2. I wanted a custom GH controller but didn't want to wreck a perfectly usable guitar to make one, and supposedly the EZ-EG sends fairly clean MIDI note data (I don't have one myself yet, but I have ordered one). Since it sends each string's note data on a seperate channel, it should be a fairly simple task to make an open source board based on the Arduino design that homebrewers could easily put together themselves in order to use the EZ-EG (or any other MIDI device, really) to control Guitar Hero. I don't know if I'll have time to finish the project in time for the Funde Razor, but it sounds like a pretty cool event so perhaps someone with more time and electronics experience could make something similar. Anyone who wants to collaborate or comment can email me at rictus (at) gmail.
Subscribe to MAKE Magazine!
Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.
$34.95 / 1 year
(4 Quarterly Issues)
Features and more @ MAKE!
MAKE @ The NYC Toy Fair 2008 - Covering DIY!HOW TO - Build the arms of assistance.
MADE in Japan - Part I.
MADE in Japan - Part II.
MADE in Japan - Part III.
Make store - Blinky bug kit - Blink!
Make store - Loud Objects Noise Toy Kit
Makers - MAKE Flickr pool contest. Win cool stuff!
Makers - Join the MAKE Facebook page - Meet other makers.
MAKE on Twitter - Tweet! Tweet!
What you're reading in MAKE - Data!
Add MAKE to your RSS reader - Real simple.
Why advertise on MAKE?
Read what folks are saying about us!
Click here to advertise on MAKE!
Phillip Torrone
Senior Editor
Tel: 707-827-7311
Gareth Branwyn
Robot Maker
Jonah Brucker-Cohen
Researcher
Natalie Zee Drieu
Senior Editor
CRAFT
Becky Stern
Culture jammer
Collin Cunningham
Sound Maker
Marc de Vinck
CNC Maker
Current Podcast
AHAB High Altitude Ballooning - Best of Weekend Projects
mp4|mov|hd|3gp|3g2|itunes This week on Best of Weekend Projects, we look back at part two of the AHAB (High Altitude Balloon Adventure). In this epic Bre & Co. travel to Eastern Washington to launch a GPS and camera enabled balloon...
More...
