DIY Bluetooth accelerometer

Technology
DIY Bluetooth accelerometer

Btttttop
College Of Computing @ Georgia Tech have a great DIY Bluetooth accelerometer, source and schematic included —

This is a small wireless sensor platform providing a bluetooth SPP link to three axes of accelerometer data. The accelerometers are sampled by a PIC microcontroller (onboard ADC) at roughly 100Hz (rate can be changed via firmware). Data from the ADC conversion is sent to a remote computer using the PIC’s UART in conjunction with a drop-in bluetooth serial part. Even with two dual-axis accelerometers onboard there are up to 17 free I/O lines and two additional ADC channels depending on the device configuration. Three sockets provide access to all PIC signals. Over-the-air programming allows for easy firmware updates and rapid prototyping without the need to have a PIC programmer or special cable. Schematics, parts lists, and firmware sources are available online.

Contextual Computing Group: Bluetooth Accelerometer – [via] Link.

Discuss this article with the rest of the community on our Discord server!
Tagged

current: @adafruit - previous: MAKE, popular science, hackaday, engadget, fallon, braincraft ... howtoons, 2600...

View more articles by Phillip Torrone

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK