RSS
Jenny stopped in and we chatted about metal etching, she later made her own cards for a lot cheaper than I was -- Cheap as in you still need a laser, but cheaper...
...pt made his using metal blanks found here, but I decided I needed a cheaper and quicker method. So I started looking around the shop (I work at Creative Awards & Promotions in Woodstock GA) and realized I could just one sheet of 24x12 outdoor aluminum and print a grid of cards on them instead of individually engraving blanks.After I found the appropriate material I slapped it into the laser and set out making the vector file. I used Corel Draw X3 to make one template card and then duplicated it until I had filled one sheet of 24x12 outdoor aluminum (I ended up fitting 30 cards).
DIY: Metal Business Cards on the Cheap - Link.
Didn't Jim Rockford have something like this in the back of his car?
Reply to this comment
No, Rockford used a small spring-loaded printing press to make fake business cards. I wish i could find such a press, i can think of many times when a quick phony card would be of use.
Reply to this comment
hello there
I need metal business cards asap.
You can reach me on 323 8362725
Thx
Coco
Reply to this comment