CMUcam3 - open source programmable embedded color vision platform

CMUcam3 is an open source programmable embedded color vision platform, you can get a CMUcam is a few places (listed on the site)... Including Seattle robotics...
The goal of the CMUcam project is to provide simple vision capabilities to small embedded systems in the form of an intelligent sensor. The CMUcam3 extends upon this idea by providing a flexible and easy to use open source development environment that complements a low cost hardware platform. The CMUcam3 is an ARM7TDMI based fully programmable embedded computer vision sensor. The main processor is the NXP LPC2106 connected to an Omnivision CMOS camera sensor module. Custom C code can be developed for the CMUcam3 using a port of the GNU toolchain along with a set of open source libraries and example programs. Executables can be flashed onto the board using the serial port with no external downloading hardware required.
Software - CMUcam - Trac - [via] Link & more.
Posted by Phillip Torrone |
May 31, 2007 02:00 AM
DIY Projects, Electronics, Open source hardware |
Permalink
| Comments (0)
| Email This |
| Digg this!
Recent Entries
- Best of CRAFT
- 10 Things 3D printers can do now
- How to nap
- GeekDad at Maker Faire
- Sugarcube sculptures
- Set your clocks back it's Standard time again...
- Pedal to a cold drink...
- Austin Event: DJ/Laptop Battle
- Single-Wheeled Bike Trailer
- Gear heart
Comments
Oldest comments listed first.
Subscribe to MAKE Magazine!
Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.
$34.95 / 1 year
(4 Quarterly Issues)
Features and more @ MAKE!

Stop by the Maker Shed store and check out THE place for open source hardware, Arduino & Arduino accessories, electronic kits, science kits, smart stuff for kids, back issues of MAKE & CRAFT, box sets, books, robots, kits from Japan and more.
Add MAKE to iGoogle - GoogleGoogle.
Add MAKE to your RSS reader - Real simple.
Add MAKE on Twitter.
Add MAKE on FriendFeed & the MAKE room.

Why advertise on MAKE?
Read what folks are saying about us!
Click here to advertise on MAKE!
Makezine authors!
Phillip Torrone
Senior Editor
Tel: 707-827-7311
Twitter / AIM
Gareth Branwyn
Jonah Brucker-Cohen
Collin Cunningham
Marc de Vinck
Kip Kay
Luke Iseman
Patti Schiendelman
Becky Stern
Mike Dixon
Peter Horvath(intern)



Leave a comment