...[Here's a] video clip of my CNC Taig mill setup as a surface mount Pick and Place machine. It's slow, but it's more fun watching it do the work then it is to do it by hand! Notice how it picks up the parts in one orientation, and then rotates them to the correct destination orientation. It then "centers" the part in the "centering pit". Also notice the way-cool http://www.HighTechSystemsLLC.com Modular Work Holding System that holds the PCB down on the HighTechSystemsLLC.com tooling plate. It makes clamping the PCBs down a snap!
Void your warranty, violate a user agreement, fry a circuit, blow a fuse, poke an eye out. Make: The risk-takers, the doers, the makers of things... Welcome to Make: Online!
Gareth Branwyn, Chris Connors (guest author), Collin Cunningham, Marc de Vinck, Peter Horvath (intern), Kip Kay, Goli Mohammadi, John Park, Sean Ragan, Becky Stern, Phillip Torrone
How-To Tuesday: Arduino 101 & the PING))) ultrasonic sensor
The PING))) ultrasonic sensor is a really easy way to measure distance with a micro-controller. All you have to do is hook up 3 wires and upload some code. These sensors are great for robots, alarm systems, or any...
More...
RSS
Wow! Does it do all that with coordinates or does it have some sort of photo recognition?
Reply to this comment