MAKE: Blog: HOW TO - Make an electromagnetic floater

HOW TO - Make an electromagnetic floater

Deriv F4Q Jr2J F2Frvefl F4Qjr2Jf2Frvefl.Large
J_Hodgie writes -

This Instructable will show you how to make a device that can float almost any object with a magnet in it.

It is much like the floating globes you can buy, except it works by balancing the forces of permanent magnets with electromagnets, rather then simply using combinations of permanent magnets. This is done by using a microcontroller and an IR sensor to detect where an object is floating below. Then based on a set value, the microcontroller uses the electromagnets to to hold the floating object at a given height.

The place the object floats at depends on the weight of the object and the power of the magnets in the object. The height is set by holding the object under the magnets and sensor and pushing the button.
The object floats at the point where the force of gravity down equals the force of the magnets pulling up, which allows it to use non-industrial electromagnets and less power to float. The program also dynamically adjusts so the object is always at the perfect height.

I decided to make the electromagnetic floater because I have always been fascinated by the floating globes in the store, but I never wanted to pay their prices, and I never liked how they only floated objects that you had to buy or came with it. So, I decided to make my own that could float anything with a magnet. The results are what you see here.

instructables : Electromagnetic Floater - Link.

Related:

Comments

Oldest comments listed first.

Subscribe to MAKE Magazine!

Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.

$34.95 / 1 year
(4 Quarterly Issues)

Subscribe now

Void your warranty, violate a user agreement, fry a circuit, blow a fuse, poke an eye out... Welcome to the Make Blog!

Features and more @ MAKE!

Stop by the Maker Shed store and check out THE place for open source hardware, Arduino & Arduino accessories, electronic kits, science kits, smart stuff for kids, back issues of MAKE & CRAFT, box sets, books, robots, kits from Japan and more.

Add MAKE to iGoogle - GoogleGoogle.
Add MAKE to your RSS reader - Real simple.
Add MAKE on Twitter.
Add MAKE on FriendFeed & the MAKE room.

Why advertise on MAKE?
Read what folks are saying about us!

Click here to advertise on MAKE!

Makezine authors!

Suggest a Site!

Phillip Torrone
Senior Editor
Tel: 707-827-7311
Twitter / AIM

Gareth Branwyn
Jonah Brucker-Cohen
Collin Cunningham
Marc de Vinck
Kip Kay
Luke Iseman
Patti Schiendelman
Becky Stern
Mike Dixon
Peter Horvath(intern)

Current Podcast

The Best of Maker Faire Austin 2008 Check out all the fun and excitement at this year's Maker Faire in Austin, Texas. People from all over the world came to experience this amazing event. Take a look at some of the highlights and make plans to... More...

Get the Make blog sent via email

Enter your email to receive the Make blog each day:

WOW! Thanks to everyone involved with Maker Faire Bay Area and Maker Faire Austin in 2008: attendees, makers, exhibitors, sponsors, volunteers, and crew...it was an AMAZING year! Over 1,000 Makers and 87,000+ attendees total! Be sure to check out the photos @ Flickr, and our Maker Faire posts for all the action! Check back for dates for 2009 soon!