MAKE: Blog: Defconbots autonomous sentry gun

Defconbots autonomous sentry gun

Kevin Hjelden and his friend Joe built this autonomous shooter for this year's Defconbots competition. They described the build before they started:

The electronics for this project are going to be relatively simple as well. To control the three servos (pan + tilt + firing), we are going to use the Pololu 8-channel servo controller. Normally we might use an atmega to do the control, however I already created code to control the pololu controller for another project and it's really inexpensive/easy to use. If it required more complicated feedback or logic, a microcontroller might have been the better choice, but in this case it wasn't, so the right decision was just to use the Pololu controller. To control the valve, we had two options. One was to use another channel on the servo controller and something like a Banebot motor controller to apply power to the electronic valve, the other was to use the servo that pushes the plunger to push a switch that opens the valve. The latter option was chosen.

Defcon Bot - [via] Link

Related:

@ DEFCON - The Kegbot project - Link
Defcon 15 round up - Link
Hackers on a Plane - Defcon - Link

Related:

Comments

Oldest comments listed first.

Posted by: Trevor_D. on September 6, 2007 at 6:57 PM

Dumb and off topic, I know...but I really like the song. Anyone know who its by?

Posted by: Wetwired on September 6, 2007 at 10:54 PM

Mirwais - Disco Science

Posted by: samurai1200 on September 6, 2007 at 10:54 PM

Ive heard it in a movie -- im thinking fight club.

anywho, I

Posted by: Wetwired on September 6, 2007 at 11:39 PM

Mirwais - Disco Science

Posted by: rabagley on September 7, 2007 at 9:05 PM

The movie you're thinking of is Snatch

Posted by: stolie on September 12, 2007 at 6:21 AM

wow that would be cool to have outside your house or on your car or something

Posted by: Justin on July 5, 2008 at 1:03 PM

So is this TFC-inspired turret choose targets by color? I see its shooting all Blue Pepsi, or is it controlled?

Subscribe to MAKE Magazine!

Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.

$34.95 / 1 year
(4 Quarterly Issues)

Subscribe now

Void your warranty, violate a user agreement, fry a circuit, blow a fuse, poke an eye out... Welcome to the Make Blog!

Features and more @ MAKE!

Stop by the Maker Shed store and check out THE place for open source hardware, Arduino & Arduino accessories, electronic kits, science kits, smart stuff for kids, back issues of MAKE & CRAFT, box sets, books, robots, kits from Japan and more.

Add MAKE to iGoogle - GoogleGoogle.
Add MAKE to your RSS reader - Real simple.
Add MAKE on Twitter.
Add MAKE on FriendFeed & the MAKE room.

Why advertise on MAKE?
Read what folks are saying about us!

Click here to advertise on MAKE!

Makezine authors!

Suggest a Site!

Phillip Torrone
Senior Editor
Tel: 707-827-7311
Twitter / AIM

Gareth Branwyn
Jonah Brucker-Cohen
Collin Cunningham
Marc de Vinck
Kip Kay
Luke Iseman
Patti Schiendelman
Becky Stern
Mike Dixon
Peter Horvath(intern)

Current Podcast

The Best of Maker Faire Austin 2008 Check out all the fun and excitement at this year's Maker Faire in Austin, Texas. People from all over the world came to experience this amazing event. Take a look at some of the highlights and make plans to... More...

Get the Make blog sent via email

Enter your email to receive the Make blog each day:

WOW! Thanks to everyone involved with Maker Faire Bay Area and Maker Faire Austin in 2008: attendees, makers, exhibitors, sponsors, volunteers, and crew...it was an AMAZING year! Over 1,000 Makers and 87,000+ attendees total! Be sure to check out the photos @ Flickr, and our Maker Faire posts for all the action! Check back for dates for 2009 soon!