RSSGP3EZ based robot won't crash
Here's a video of a simple robot built with two RC servo motors and a GP3EZ controller that can be setup without any programming knowledge. Plus it doesn't seem to crash into anything.
Posted by Jonah Brucker-Cohen |
May 29, 2008 09:44 AM
Electronics, Robotics |
Permalink
| Comments (1)
| Email This |
| Digg this!
Recent Entries
- 10 Things 3D printers can do now
- How to nap
- GeekDad at Maker Faire
- Sugarcube sculptures
- Set your clocks back it's Standard time again...
- Pedal to a cold drink...
- Austin Event: DJ/Laptop Battle
- Single-Wheeled Bike Trailer
- Gear heart
- HOW TO - Make a wall clock from old hard drives
Comments
Oldest comments listed first.
| Posted by: kel dunn on May 29, 2008 at 1:28 PM |
Is this just a pic programmer, from the picture I can almost read pic16f84 but it could be something else. Anybody buy one of these?
On there site there is a schematic in the manual but it is oddly lacking any parts list including the values for the minor components. So I'm thinking they are including this curiously absent bit of information in the kit.
So, once again, any sucke...I mean...early adopters out there who can provide the parts list and perhaps a scan of the circuit board for us makers.
Otherwise this bit of product placement is very un-make-esque.
Subscribe to MAKE Magazine!
Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.
$34.95 / 1 year
(4 Quarterly Issues)
Features and more @ MAKE!
Stop by the Maker Shed store and check out THE place for open source hardware, Arduino & Arduino accessories, electronic kits, science kits, smart stuff for kids, back issues of MAKE & CRAFT, box sets, books, robots, kits from Japan and more.
Add MAKE to iGoogle - GoogleGoogle.
Add MAKE to your RSS reader - Real simple.
Add MAKE on Twitter.
Add MAKE on FriendFeed & the MAKE room.
Why advertise on MAKE?
Read what folks are saying about us!
Click here to advertise on MAKE!
Makezine authors!
Phillip Torrone
Senior Editor
Tel: 707-827-7311
Twitter / AIM
Gareth Branwyn
Jonah Brucker-Cohen
Collin Cunningham
Marc de Vinck
Kip Kay
Luke Iseman
Patti Schiendelman
Becky Stern
Mike Dixon
Peter Horvath(intern)
Current Podcast
The Best of Maker Faire Austin 2008
Check out all the fun and excitement at this year's Maker Faire in Austin, Texas. People from all over the world came to experience this amazing event. Take a look at some of the highlights and make plans to...
More...
Leave a comment