HOW TO - Refill a Brita filter

Jason @ HACKS writes:

We filter our drinking water at home, though it's not because there's a risk of giardia or heavy metals in the tap water where we live. Personally, I just like the taste of water that's been run through activated carbon. If your own water is safe from heavy metals, but you still like the way water tastes when it's been through something like a Britta filter, there's an easy way to convert the filter to be reusable, saving a ton of waste and a bit of money.

Your standard Brita pitcher filter contains two components, an ion exchange resin that is used to reduce heavy metals, and a bunch of activated carbon which is used to remove chlorine and various organic impurities that can affect the water's quality and taste. I'm not sure about how to go about recharging or replacing the ion exchange resin, but activated carbon is available in any pet store, where it is sold for aquarium water filtration.

Here's a link to an Instructable which shows you how to convert a Brita pitcher filter into a refillable carbon filter. You'll only need a couple standard tools to do the conversion, and when it's complete you'll have great tasting water, you'll be able to do refills for about 50 cents a cartridge, and you won't be tossing a one-time-use hunk of plastic in the landfill.

Posted by Becky Stern | Jun 9, 2008 07:00 PM
DIY Projects, Green, Instructables | Permalink | Comments (6) | Email This | Bookmark and Share | Digg this!

Recent Entries

Comments

Oldest comments listed first.

Posted by: Luis on June 9, 2008 at 7:55 PM

I don't know for sure but..

I think the ion exchange resin might be the same stuff in water softeners.. If so I think it can be recharged by soaking in brine (salt water).


Posted by: Dale on June 9, 2008 at 10:39 PM

Read the comments in the Instructable

This instructable is a couple months old. Make sure to read the comments, changing out the carbon without replacing it with the same media/nominal pore size could result in less turbidity (cloudiness) reduction, as well as he doesn't add any ion exchange resin which would remove hardness, iron, possibly manganese (usually cause of staining and water colour issues) as well as other metals and minerals.

Activated carbon mostly works by absorption, and it's a nice breeding ground for bacteria, so make sure you read up on it before you do this.


Posted by: Dan on June 9, 2008 at 10:51 PM

Activated carbon at pet stores is probably not of the best purity or reliable origin. You may want to check with a brewing supplies store to get activated carbon intended for consumable beverages.


Posted by: Dale on June 10, 2008 at 9:00 AM

Good addition Dan

Dan makes a good point, if you're in North America, make sure you get NSF 61 certified activated carbon as it is designed for potable water usage and will not leach anything harmful.


Posted by: Beth Terry on June 10, 2008 at 6:59 PM

And while you're at it, ask Clorox to create a recycling program for Brita cartridges!

Not everyone is willing to go to the trouble of opening up and refilling the filter. In Europe, users return them to the store where purchased to be shipped back to Brita for recycling. All three components (plastic, carbon, and ion exhange resin) are recycled/reused.

In North America, Brita is owned by Clorox, which has not created any practical way to refill or recycle the filters. We think they should. Please visit http://www.takebackthefilter.org to sign the petition, write a letter, send us your used filters for a direct action, and make your voice heard.

Thanks!
Beth


Posted by: Someone on June 11, 2008 at 3:01 PM

Replace the ion exchange resin with one which you can regenerate

If only decalcification is needed do the following:

1) Just open the Brita filter, with a cutter.
2) Throw out the resin (not so easy to regenerate this because it contains several resins)
3) Put in a resin which just filters out Calcium and Magnesium (and replaces it with Natrium), only problem is to buy it in such small portions).
4) Seal the Brita filter with a soldering iron.
5) From then you can regenerate the filter with salt water whenever necessary.

Doing that for years now. Still works. Just check the hardness of the water from time to time, to make sure nothing went wrong.

Carbon filter isn't really necessary in my eyes.


Leave a comment


Subscribe to MAKE!Subscribe to MAKE Magazine!

Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.

$34.95 / 1 year
(4 Quarterly Issues)

Subscribe now

How-to videos for Makers and Crafers!


Void your warranty, violate a user agreement, fry a circuit, blow a fuse, poke an eye out... Welcome to the Make Blog!

Features and more @ MAKE!

Maker shed - cool stuff to make!
Stop by the Maker Shed store and check out THE place for open source hardware, Arduino & Arduino accessories, electronic kits, science kits, smart stuff for kids, back issues of MAKE & CRAFT, box sets, books, robots, kits from Japan and more.

Add MAKE to iGoogle - GoogleGoogle.
Add MAKE to your RSS reader - Real simple.
Add MAKE on Twitter.
Add MAKE on FriendFeed & the MAKE room.


Advertise here with FM.

Why advertise on MAKE?
Read what folks are saying about us!

Click here to advertise on MAKE!

Subscribe to MAKE Magazine!

Makezine authors!


Suggest a Site!

Phillip Torrone
Senior Editor
Tel: 707-827-7311
Twitter / AIM

Gareth Branwyn
Jonah Brucker-Cohen
Collin Cunningham
Marc de Vinck
Kip Kay
Luke Iseman
Patti Schiendelman
Becky Stern
Mike Dixon
Peter Horvath(intern)


Current Podcast

itunesdl.gif The Best of Maker Faire Austin 2008 Check out all the fun and excitement at this year's Maker Faire in Austin, Texas. People from all over the world came to experience this amazing event. Take a look at some of the highlights and make plans to... More...

Get the Make blog sent via email

Enter your email to receive the Make blog each day:



WOW! Thanks to everyone involved with Maker Faire Bay Area and Maker Faire Austin in 2008: attendees, makers, exhibitors, sponsors, volunteers, and crew...it was an AMAZING year! Over 1,000 Makers and 87,000+ attendees total! Be sure to check out the photos @ Flickr, and our Maker Faire posts for all the action! Check back for dates for 2009 soon!

Make Categories

www.flickr.com
photos in MAKE More photos in MAKE Flickr Pool
www.flickr.com
photos in Craft More photos in Craft Flickr Pool

Advertise here.
Why advertise on MAKE?
Read what folks are saying about us!

Click here to advertise on MAKE!
Subscribe to MAKE Magazine!

Recent Posts from the Craft: Blog

Recent Posts from the Hackszine Blog