SlugPower – Linux controlled power switch

Technology

linuxpower_20081110.jpg

Phil Endecott has done a bit of hacking with the Linksys NSLU2 “Slug”, the low-power network storage device which runs Linux under the hood. His SlugPower project is a switched outlet that can be controlled from the Slug. This enables his print server to power up the printer when it needs to be printing, and automatically cut power to the device when it’s not in use.

This page describes the hardware and software design of a printer power switch controlled over USB from my Linksys NSLU2, aka Slug. The unit can, however, be controlled from any Linux box, and can switch anything, not just printers.

My NSLU2 acts mostly as a file and print server. I can go for weeks without printing anything, so I want to keep the printer switched off when I’m not using it (it takes about 4W while idle, which must be more than 99% of its total energy consumption). But it’s upstairs, and I don’t want to have to go up and down stairs once to switch it on and again to collect my printing. So I decided to get a power switch.

Remote power switches are pretty common in server rooms, but they are costly. This is a pretty affordable way to control the power to any device from anywhere in the world.

SlugPower – A Slug-Controlled Power Switch
Phil Endecott’s Slug Projects
NSLU2-Linux

2 thoughts on “SlugPower – Linux controlled power switch

  1. Anonymous says:

    Next step… the Power+USB combo cable? To have only one cable between the plug and the printer…

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK