RSS
I found this Arduino project really interesting and educational. They used several different techniques to get everything to work properly. I love the disclaimer of "way too many technologies". How true! However, it's not always about the practicality of a project, as much as it's about the process and documentation.
Here's my latest project. It involves way too many technologies for the sole purpose of controlling iTunes with Wii Nunchuck. Signal flow is almost uni-directional, so let's go from step by step from the Nunchuck to iTunes.
More about using an Arduino and Wii Nunchuck to control iTunes
In the Maker Shed:
More about the Arduino Mega in the Maker Shed
You don't need to cut your nunchuck cord. You can actually just stick some wires into the plug (the same size as in that picture). They fit quite snugly, especially if you bend them over and tape them to the plug.
Reply to this comment
That's a great tip, thanks! I'm going to have to try it out.
Reply to this comment
You can get breakout boards for the nunchucks, would be pretty handy for stuff like this:
http://todbot.com/blog/2008/02/18/wiichuck-wii-nunchuck-adapter-available/
Reply to this comment
Seems like a LOT of overkill for something that you should have just done through BlueTooth.. in fact, you can use bluetooth and glovepie to control iTunes. Or you can use another program called 'BlueTunes'. I use BlueTunes and it is GREAT!
Reply to this comment
Yes it is. But the process is really interesting, and very well documented. I think there is a lot of great discoveries here that the author shared with all of us. Many of these techniques can be applied to "other solutions". Good stuff!
Reply to this comment