Faucet hack

14 thoughts on “Faucet hack”

1. fophillips says:

   June 19th, 2009 at 4:17 pm

   I can’t say I have ever thought of this as a problem…

1. zof says:

   June 19th, 2009 at 5:48 pm

   Then again you have never had a sink with separate water faucets for hot and cold, not common at all but with such a set up you have your choice of really hot water or really cold water no where in between. Me I would have replaced the plumbing or made the land lord replace it as I do believe there should be building codes on having an adjustable faucet. Quick hack none the less.

2. salman says:

   June 20th, 2009 at 8:42 pm

   I’ve used these..really bad when trying to take a shower and the shower head is broken, try mixing hot and cold water from the spigot..ouch!!!

3. hahahut says:

   June 21st, 2009 at 10:31 pm

   I have the same problem in my bathroom. Don’t really think my landlord would go through all the trouble to replace it. So never asked either. So this is a nice and quick fix!

4. nottingham says:

   September 5th, 2009 at 8:46 am

   does the water mix properly though? and where can we get one if it does!

5. Joice says:

   December 13th, 2012 at 10:38 am

   Hi there, how did u build it? Could i buy something similar?
   I have the same prob in my flat and it’s a pain in the winter not to have warm water, just stone cold or flipping hot…
   Thanks

6. Maheen says:

   October 17th, 2013 at 1:40 pm

   Any idea how i can contact this Steve Donelly? Can’t find him on facebook!

Comments are closed.