RSS
The SD Card Shield from the Maker Shed is an inexpensive break out board for a standard SD Card. It makes adding mass storage and data logging to your next Arduino project a lot easier. The shield allows you to select either 3.3V or IO port power, allowing for added flexibility depending on you application.
In the Maker Shed: SD card shield for Arduino
Posted by Maker Shed |
Nov 11, 2009 01:00 AM
Arduino, Maker Shed Store |
Permalink
| Comments (1)
| Email This |
| Digg this!
Recent Entries
- Autonomous micro helicopters
- A Way to See the Wind
- Our Autobot in Odessa
- Arduino prototyping lap desk
- Projects: Failure and mounting a "scratch monkey"
- Battle Symets are GO!
- Screw-in coffin patent issues
- Beginner woodworking project for illusionists?
- Brickarms molds
- LED people remake
Comments
Oldest comments listed first.
Leave a comment
Subscribe to MAKE Magazine!
Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.
$34.95 / 1 year
(4 Quarterly Issues)
Hi
I just tried to write data to the sc card shield with the provides library and example file.
I always get an error "Fail initializing".
For my tests I used an old 128 MB SD card and a newer with 1 GB.
Do I need to use a special SD Card?
Reply to this comment