RSSUsing a low power amateur radio transmitter and a simple light bulb receiver circuit, we see how radio waves and electromagnetic induction transmit energy and signals wirelessly through the air. We also see how dipole and Yagi antennas radiate their energy in different patterns. Read on to build your own dipole receiving antenna!
Subscribe to the MAKE podcast in iTunes, or download the m4v video.
More:
I made the light bulb detector with some materials I had laying around my apartment: a flash light bulb, a chopstick (wooden dowel), wire, tools to solder, hair ties (zip ties work too). You can easily make one too. But make sure that you comply with all safety regulations when you play with your light bulb detector. More information on RF exposure safety is available here.
1. Solder small pieces of wire to the terminals of the light bulb.
2. Basically you are using wire to make a dipole antenna for the light bulb. Use this calculator to find the length of the wires for your dipole antenna by entering in the frequency. The value for the quarter wavelength is the length of each wire (you may need to cut off an additional half inch from each side).
3. Solder the antenna wire to the light bulb wires and secure everything to the chopstick to keep it straight using your hair ties/zip ties/glue gun.
What a great learning tool!
Can anyone direct me to a web site that has a visual representation of how the reflector and director wires work? It seems counter-intuitive that a simple wire could reflect or focus the electromagnetic energy.
Reply to this comment
I love when something is explained simply.
Explains why all those ham radio towers my neighbors had were shaped the way they were.
Reply to this comment
> direct me to a web site
I wish someone would make such animations! The only visual representations I've seen have been for single-element antennas. MIT 802 course (TEAL project) has some good ones:
http://web.mit.edu/8.02t/www/802TEAL3D/visualizations/light/
Antennas are very strange beasts, but it's not impossible to arrive at an intuitive grasp. One important point is that antennas act "fuzzy," they don't act as thin or as small as their physical size. A narrow wire antenna can absorb waves which pass to the side and don't actually touch the metal, so the antenna casts a wide "EM shadow" which acts like a broad disk rather than like a thin wire. Think of antenna elements as being like fuzzy spheres of 1/2-wave diameter.
Another important point is that all antennas receive and transmit simultaneously. Therefore, if you hold a disconnected metal wire near a transmitting antenna, that floating wire absorbs EM waves, develops an internal current, begins oscillating, and transmits the waves again... but with a phase-lag. You can adjust the phase-lag of the re-emission by changing the length of the wire. A Yagi antenna is actually a row of separate radio transmitters, each one sending out waves of slightly different phase. "Sculpt" the phases so they add and subtract just right, and you'll end up sending an intense beam from one end of the array (yes, very analogous to a row of atoms in a laser rod.)
Reply to this comment
Hey, try using a #48 or #49 pilot light. Those things turn on at extremely low mA. (But wouldn't a red superbright LED be even more sensitive?)
Reply to this comment
an LED wouldn't light with an AC source. current can only flow one direction through them.
Reply to this comment
I didn't realize all those antenna "crossbars" were reflectors and lenses. A longer video would be really cool. Maybe a fixed array of lights to really show how changes affect things?
Reply to this comment
Diana,
I've looked at a bunch of your ham posts here on Make and was wondering what sort of flexible HT antennas you like?
Thanks,
Panic
Reply to this comment
I've had a basic understanding of antenna theory for quite a while, but you just hit a home run in the world series at the bottom of the ninth with the bases loaded. Thank you.
It was truly magical watching your demo.
Reply to this comment