Skill Set: Understanding Basic Woodworking Tools

Woodworking
Skill Set: Understanding Basic Woodworking Tools


For our Woodworking Skill Set theme, we asked MAKE contributor Len Cullum to contribute some pieces on understanding basic tools and techniques. His first piece looks at five must-have beginner woodworking tools. As Len says below, your choice in tools may vary. Tells us about your beloved woodworking hand tools in the comments below. — Gareth

Today I’m going to focus on what I consider the five basic hand tools for working with wood. These are the fundamentals that will allow you to build most anything. Keep in mind that no one tool is right for everyone. The hammer that I love might be the one that makes your wrist sore, or my favorite saw might feel backwards. Don’t be afraid to try different tools and techniques until you find the ones that feel right and make the most sense to you.

The Hammer: Nothing says blunt force like a hunk of metal on the end of a stick. Probably the oldest tool in the book. When I first started woodworking, I remember seeing a picture of a guy with his hammer collection, it was a whole room filled with hundreds of different hammers. At the time, I couldn’t imagine needing more than one, but I feel much differently now. Within eyeshot as I type this, I can see nine hammers. Each is different and each sees (fairly) regular use. The one pictured above is easily my favorite. It’s a 375g Japanese carpenters hammer. One face is flat, for driving nails, the other is slightly convex for driving the nail below the surface. I use it for everything from driving chisels and adjusting planes to knocking joints together and closing cans. It’s my go-to hammer. The weight is right and I like its balance. If your work will require a lot of nailing, a claw hammer might be a better choice. For me, I would probably stick with this one and add a small pry bar to my collection. A tip for the claw hammer users: when doing lighter chopping, try using the side of the hammer head to drive the chisel instead of the face. It gives you more control and a larger striking area.



Chisels: Next in line is the chisel. It can be used for anything from heavy chopping to light paring or fine carving. While also known to open paint cans, turn screws, and act as a pry bar, these are not recommended uses. Seriously, use a screwdriver. A screwdriver will appreciate the attention. While there are hundreds of chisel sizes and styles, most people can get by with four. I would recommend 1/4, 1/2, 3/4, and 1″ standard bench chisels. Select ones that feel good in your hand and learn how to sharpen them. There are virtually no chisels that are ready to use right off the shelf, they all need some sharpening to get them to sing. Once you experience a truly sharp chisel, you will understand the difference, not only by what you’re able to achieve, but the ease with which you can do it. Above is a heavy patterned chisel called atsu-nomi (thick chisel) that’s used for cutting joints in large timbers. It’s part of a set made for me by master blacksmith Iyoroi and it’s one of my favorites.


Hand Planes: Historically, hand planes were used mostly (but not exclusively) for smoothing and adjusting the thickness of rough board (called “thicknessing”). While some still prefer to work this way, when it comes to dimensioning stock, most of the heavy work is done by machines. This doesn’t mean the hand plane is obsolete. It remains an incredibly useful tool that no woodworker should be without. A well-tuned plane can do in minutes what can take a sander an hour, and produce an arguably better surface in the process. It also allows you to work while standing in a pile of shavings instead of a cloud of dust. If I had to choose only one, it would be a low-angle block plane like the one here. Aside from being fairly easy to set up and sharpen, it can be used for everything from trimming and shaping stock to finish planing surfaces. And like chisels, they’re rarely ready to use out of the box. They should be looked at more as a kit that you have to finish before it’s ready to use. (Basic chisel and plane set up and sharpening will be covered in an upcoming post.)


Hand Saw: As with the hand plane, much of the work a saw preforms has been picked up by the powered version. Even so, the handsaw remains a useful and necessary part of a woodworker’s collection. When it comes to saws for cutting wood, there are two basic types: rip saws and crosscut saws. Rip saws are meant to cut in the direction of the grain and typically have fewer, bigger teeth. Crosscut saws are, as the name implies, for cutting across the grain. They typically have more and finer teeth in order to shear the grain and leave a cleaner cut. While combination and general purpose saws exist, they tend to be a little too aggressive for careful work. My choice of hand saw is a Japanese ryoba nokogiri (double blade saw). It has rip teeth on one side, crosscut teeth on the other, and unlike western saws, it cuts on the pull stroke. While they used to be difficult to find, you can now usually get them at home stores.


Clamps: Last on the list is the clamp. Without clamps, nearly every operation with the tools above becomes more difficult. Not only are they good for holding together the final assembly, their ability to keep things where you want them while you work is invaluable. There is little that is more frustrating than trying to work a piece of wood that keeps sliding around. A couple of clamps are essential and most woodworkers, at least once in their life, have repeated the mantra “you can never have enough clamps.” Usually while wishing they had one or two more. Two 24″ bar clamps are good. Four are better. Eight are better still…


Bio: Len Cullum is a woodworker living in Seattle, WA. He specializes in building Japanese-style garden structures and architectural elements. It was a picture of a wooden kayak in the summer of 1992 that set him on the path he remains on today. The desire to build one, and the fear of it sinking, are what drove him to learn finer woodworking skills. After eighteen years of brushing up on those skills, and building lots of other things, he still hasn’t attempted that kayak.

42 thoughts on “Skill Set: Understanding Basic Woodworking Tools

  1. Rob Cameron says:

    The proper form of the clamps quote: “You can never be too beautiful, too rich, or have too many clamps.”

    1. ian anderson says:

      Especially if you are a boat builder !!!!

    2. ian anderson says:

      Especially if you are a boat builder !!!!

    3. ian anderson says:

      Especially if you are a boat builder !!!!

  2. Josh Burroughs says:

    Glad to see hand tools getting some love in this post :-)

    Thought I’d add that there’s a sixth tool that’s just as important as the other five – sharpening media. Those planes and chisels are going to need to be shaving sharp to work their best and that’s not something you can really outsource. I like a 6″ dry grinder for heavy metal removal followed by oilstones – first a medium India stone and then hard translucent Arkansas but that’s just one option. Water stones are very popular these days, some of the high end Japanese artificial stones are pretty amazing actually. Using fine sand paper glued to a glass plate is a very popular starter method and very cheap to get started with – google “Scary Sharp” for the details. Diamond stones, diamond paste, slow speed wet grinders and sandpaper based power sharpeners are all also options. All the major woodworking retailers and mail order outfits stock a variety of options to help you out here.

    I also wanted to mention that there is currently a thriving market in vintage woodworking tools on the internet. America’s factories produced millions of hight quality saws, chisels and planes starting in the 1860’s through the early 1950’s and many of them are still in working condition today. These are literally the tools that built this country and in the pre-powertool era they had to be made well for daily professional use. As a result for example a 75 year old hardware store brand handsaw is actually a better made tool than what you can find at the hardware store today and they usually sell for just a few dollars on eBay or even cheaper at garage sales. Same is generally true for chisels and hand planes as well. While there are some boutique makers of new hand tools making some truly awesome tools that are worth the cost it’s still a high cost. If you have a bit more time than money vintage tools are a great way to build up your woodworking tool kit with good tools without breaking the bank.

    eBay is a good source for vintage tools if you’re willing to take a few chances, look under tools in the collectibles category for the good stuff.

    For more certainty there are a few well respected dealers of vintage tools I’d like to mention:

    Walt Q at http://www.brasscityrecords.com
    Patrick Leach at http://www.supertool.com

    For new tools I like:
    http://www.leevalley.com
    http://www.toolsforworkingwood.com

    I also highly recommend the forums at http://www.woodnet.net lots of very helpful folks there who will answer any questions you might have on woodworking and tools.

    Cheers,

    Josh

    1. Anonymous says:

      I have the same Hammer and love it – got it from Lee Valley.

    2. Anonymous says:

      I have the same Hammer and love it – got it from Lee Valley.

  3. Josh Burroughs says:

    Glad to see hand tools getting some love in this post :-)

    Thought I’d add that there’s a sixth tool that’s just as important as the other five – sharpening media. Those planes and chisels are going to need to be shaving sharp to work their best and that’s not something you can really outsource. I like a 6″ dry grinder for heavy metal removal followed by oilstones – first a medium India stone and then hard translucent Arkansas but that’s just one option. Water stones are very popular these days, some of the high end Japanese artificial stones are pretty amazing actually. Using fine sand paper glued to a glass plate is a very popular starter method and very cheap to get started with – google “Scary Sharp” for the details. Diamond stones, diamond paste, slow speed wet grinders and sandpaper based power sharpeners are all also options. All the major woodworking retailers and mail order outfits stock a variety of options to help you out here.

    I also wanted to mention that there is currently a thriving market in vintage woodworking tools on the internet. America’s factories produced millions of hight quality saws, chisels and planes starting in the 1860’s through the early 1950’s and many of them are still in working condition today. These are literally the tools that built this country and in the pre-powertool era they had to be made well for daily professional use. As a result for example a 75 year old hardware store brand handsaw is actually a better made tool than what you can find at the hardware store today and they usually sell for just a few dollars on eBay or even cheaper at garage sales. Same is generally true for chisels and hand planes as well. While there are some boutique makers of new hand tools making some truly awesome tools that are worth the cost it’s still a high cost. If you have a bit more time than money vintage tools are a great way to build up your woodworking tool kit with good tools without breaking the bank.

    eBay is a good source for vintage tools if you’re willing to take a few chances, look under tools in the collectibles category for the good stuff.

    For more certainty there are a few well respected dealers of vintage tools I’d like to mention:

    Walt Q at http://www.brasscityrecords.com
    Patrick Leach at http://www.supertool.com

    For new tools I like:
    http://www.leevalley.com
    http://www.toolsforworkingwood.com

    I also highly recommend the forums at http://www.woodnet.net lots of very helpful folks there who will answer any questions you might have on woodworking and tools.

    Cheers,

    Josh

  4. Anonymous says:

    i would have included a scribe over a plane. functionally, a plane is a chisel in a mount, but without a means to identify where you’re cutting, or where you’re going to put in that mortise, your blades won’t be useful.

    i can and have built many things without clamps or a plane, but i can’t think of one wood working project that hasn’t used a mallet or hammer, scribe or pencil, and a saw and chisel. a good square probably fills out my 5 most commonly reached for tools.

  5. Anonymous says:

    i would have included a scribe over a plane. functionally, a plane is a chisel in a mount, but without a means to identify where you’re cutting, or where you’re going to put in that mortise, your blades won’t be useful.

    i can and have built many things without clamps or a plane, but i can’t think of one wood working project that hasn’t used a mallet or hammer, scribe or pencil, and a saw and chisel. a good square probably fills out my 5 most commonly reached for tools.

  6. Rahere says:

    For all that I agree with what’s been said on the importance of decent sharpening, there’s one thing about the Jap tools also needs adding: that the fine-bladed saws cut as fine as the scribe line, particularly if it’s a tad outside the ruler guide. That means you don’t cut on the waste side of the line, but on it. The cut across grain can be so smooth, particularly with fine-grained woods, it resembles a chisel-cut surface, particularly with a new blade, which is worth having when cutting exposed dovetails and mortices.

  7. Carpenters and Joinery says:

    Clamps FTW!

  8. anonymous says:

    thanx man… this stuff is gr8.. really helped in my assingment!..

  9. MAKE | Workshop: Len Cullum in Seattle, Washington says:

    […] Understanding Basic Woodworking Tools […]

  10. ○DIY/Tip▶ Workshop: Len Cullum in Seattle, Washington « dot dot dob tob tob says:

    […] Understanding Basic Woodworking Tools […]

  11. Workshop: Len Cullum in Seattle, Washington says:

    […] Understanding Basic Woodworking Tools […]

  12. sedona watch works says:

    The other day, while I was at work, my cousin stole my iPad and tested to see if it can survive a
    twenty five foot drop, just so she can be a youtube sensation.
    My apple ipad is now broken and she has 83 views. I know this
    is entirely off topic bbut I had to shnare it with someone!

  13. replica watches says:

    I was suggested this website bby my cousin. I’m now not sure
    whether or not this publish is written via him as no one else recognise such
    particular approximately my difficulty. You’re amazing!
    Thank you!

  14. luxury watches how it's Made says:

    Howdy! This is kind of off topic but I need some avice
    from an established blog. Is it hard to set up your own blog?
    I’m not very techincal but I can figure things out pretty fast.
    I’m thinking about creating my own but I’m not sure
    where to start. Do you have any tips or suggestions?
    Appreciate it

  15. hand fitting platform says:

    Outstanding story there. Whhat happened after?
    Good luck!

  16. Verona says:

    It’s an remarkable paragraph in support of all the online people; they will obtain benefit from it I am sure.

Comments are closed.

Discuss this article with the rest of the community on our Discord server!
Tagged

Gareth Branwyn is a freelance writer and the former Editorial Director of Maker Media. He is the author or editor of over a dozen books on technology, DIY, and geek culture. He is currently a contributor to Boing Boing, Wink Books, and Wink Fun. His free weekly-ish maker tips newsletter can be found at garstipsandtools.com.

View more articles by Gareth Branwyn

ADVERTISEMENT

Maker Faire Bay Area 2023 - Mare Island, CA

Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!

Buy Tickets today! SAVE 15% and lock-in your preferred date(s).

FEEDBACK