I am descended from 5,000 generations of tool-using primates. Also, I went to college and stuff. I am a long-time contributor to MAKE magazine and makezine.com. My work has also appeared in ReadyMade, c't – Magazin für Computertechnik, and The Wall Street Journal.
Lately I’ve been getting interested in heat-welding plastics, and so far some of the best practical, hands-on advice I’ve found within the tubes comes from this black-and-white Seelye Model 63 Plastic Welder manual posted over at amphibious / all-terrain vehicle enthusiast site 6×6 World.
It’s posted as low-to-middling resolution JPGs, so the quality isn’t great, but it’s definitely readable/usable.
14 thoughts on ““All About Welding Plastics””
3D Printer Villagesays:
For anyone who doesn’t know – the plastic used in 3D printing is ABS 3mm plastic welding rod. Most of the companies that extrude it in the US did it exclusively for plastic welding, but have found new customers in the DIY 3D printing arena.
3D Printer Villagesays:
For anyone who doesn’t know – the plastic used in 3D printing is ABS 3mm plastic welding rod. Most of the companies that extrude it in the US did it exclusively for plastic welding, but have found new customers in the DIY 3D printing arena.
3D Printer Villagesays:
For anyone who doesn’t know – the plastic used in 3D printing is ABS 3mm plastic welding rod. Most of the companies that extrude it in the US did it exclusively for plastic welding, but have found new customers in the DIY 3D printing arena.
3D Printer Villagesays:
For anyone who doesn’t know – the plastic used in 3D printing is ABS 3mm plastic welding rod. Most of the companies that extrude it in the US did it exclusively for plastic welding, but have found new customers in the DIY 3D printing arena.
Joesays:
I have done plastic welding for years, The plastic welders are fine, But I have had just as good luck using a 40 watt flat tip soldering iron. My son broke the plastic mirror off of his car, the dealer wanted $140 for a new mirror. I plastic welded the mirror back on. When you plastic weld, become familiar with the different types of thermoplastics and make sure you weld using the same type of plastic.
I save old pieces of plastic, cut then into strips and use them as welding rods. If you want to get fancy, Harbor Freight Tools sells plastic welding rods.
Thanks
Joe
Donsays:
Thanks for the useful document. I made a slightly enhanced PDF combining all the pages (images) that can be downloaded: http://www.mediafire.com/?ad4nb1b1aaf5vbs
Anonymoussays:
Snarky comment follows. No useful information is provided.
I’m still waiting for wooden welding rods.
I am descended from 5,000 generations of tool-using primates. Also, I went to college and stuff. I am a long-time contributor to MAKE magazine and makezine.com. My work has also appeared in ReadyMade, c't – Magazin für Computertechnik, and The Wall Street Journal.
Our websites use cookies to improve your browsing experience. Some of these are essential for the basic functionalities of our websites. In addition, we use third-party cookies to help us analyze and understand usage. These will be stored in your browser only with your consent and you have the option to opt-out. Your choice here will be recorded for all Make.co Websites.
Allow Non-Necessary Cookies
Escape to an island of imagination + innovation as Maker Faire Bay Area returns for its 15th iteration!
Buy Tickets today! SAVE 15% and lock-in your preferred date(s).
For anyone who doesn’t know – the plastic used in 3D printing is ABS 3mm plastic welding rod. Most of the companies that extrude it in the US did it exclusively for plastic welding, but have found new customers in the DIY 3D printing arena.
For anyone who doesn’t know – the plastic used in 3D printing is ABS 3mm plastic welding rod. Most of the companies that extrude it in the US did it exclusively for plastic welding, but have found new customers in the DIY 3D printing arena.
For anyone who doesn’t know – the plastic used in 3D printing is ABS 3mm plastic welding rod. Most of the companies that extrude it in the US did it exclusively for plastic welding, but have found new customers in the DIY 3D printing arena.
For anyone who doesn’t know – the plastic used in 3D printing is ABS 3mm plastic welding rod. Most of the companies that extrude it in the US did it exclusively for plastic welding, but have found new customers in the DIY 3D printing arena.
I have done plastic welding for years, The plastic welders are fine, But I have had just as good luck using a 40 watt flat tip soldering iron. My son broke the plastic mirror off of his car, the dealer wanted $140 for a new mirror. I plastic welded the mirror back on. When you plastic weld, become familiar with the different types of thermoplastics and make sure you weld using the same type of plastic.
I save old pieces of plastic, cut then into strips and use them as welding rods. If you want to get fancy, Harbor Freight Tools sells plastic welding rods.
Thanks
Joe
Thanks for the useful document. I made a slightly enhanced PDF combining all the pages (images) that can be downloaded: http://www.mediafire.com/?ad4nb1b1aaf5vbs
Snarky comment follows. No useful information is provided.
I’m still waiting for wooden welding rods.