

I have quite the scissor collection. I used to keep them loosey goosey in a box, but after reaching in to grab a pair, and ending up almost loosing my hand, I decided to devise a new and more safe way to store them. I took a cue from simple knitting needle holders, and stitched up a quick roll-up holder. I used some sturdy printed canvas, and a lovely silk ribbon. This is a great project for using up scraps, and a fun way to organize your tools.

Materials:
Your scissor collection
1 yard heavy cotton fabric
1 yard ribbon
Rotary cutter and mat
Sewing machine
Thread
Not shown: Straight pins

Step 1: Fold the cotton fabric in half. Set your scissors out on the fabric. I lined up the screw of each pair, regardless of the handles or blade length. This way all the scissors will be centered on the holder. Cut out the fabric, being sure to cut through both sides.

Step 2: Cut a strip of fabric 1″ wide, and 4″ longer than the lined up scissors. Center it over the scissors.

Step 3: Pin down the strip in-between each pair of scissors. Push the straight pins into the fabric, as close as you can to the sides of the scissors.

Step 4: Set your sewing machine to the straight stitch. Sew along the three cut edges and the one folded edge of the fabric holder.

Step 5: Sew the strip down, along each line that you have pinned. I knew that I would have trouble sewing straight and even, so I purposefully made slightly uneven stitches. I sewed over the fabric strip three times where each pin was placed.

Step 6: Cut all the thread ends from the holder. Also cut off the remaining edges of the strip.

Step 7: Cut 2 pieces of ribbon, one 6″ long, and one 12″ long. Sew the short ribbon to the back of the holder, right against the edge.

Step 8: Mark where the rolled up holder meets the edge with the short ribbon. Take the scissors out, and then sew the long ribbon to the back of the holder, where you have marked.

Step 9: Now you can put all the scissors back and roll up the holder. Wrap the long ribbon around the bundle to secure it, and tie it closed. Volia!










Good idea but I’m speachless ..all those raw edges…. yikes!!!!
And yikes again!! Couldn’t believe what I was seeing. And worse–in one of the first pictures sets a Baby Lock. Serge or zig-zag away!! Raw edges are a definete NO NO!!
Otherwise, love your idea and I intend to make one for my pile of scissors ASAP!
Oh, one other thing–heat seal the edges of any ribbon you use for this project, otherwise it will just constantly unravel.
Heat seal can be done with a candle flame or the flame of a lighter. Be very careful using this technique.
// What's Trending
Raspberry Pi Design Contest
Seventeen Sneaky Secret Hides
Ten Tips for Screws and Screwdrivers
10 Things to Connect to Your Raspberry Pi
Sneak Preview: The Wheeled Wonders of Maker Faire
I Have a (Puzzling) Dream
The Oreo Separator Man at Maker Faire
Tribute to Kathreen Ricketson, Founder of Whipup.net
// What's Shared
A better way to slice a pumpkin
DIY Nerf Darts
In the Maker Shed: Minty Boost USB Charger
100 Dollar Store Organization Ideas for Craft Rooms and Beyond
Mad’s Mouse House
Lace Princess Crowns
I Have a (Puzzling) Dream
Play the Rings of a Tree Trunk Like a Record
// Most Commented
DIY Hacks & How To’s: Get Emergency Power from a Phone Line
Resin Casting: Going from CAD to Engineering-Grade Plastic Parts
Ten Tips for Screws and Screwdrivers
Ten Tips for Better Measurement
Makers on TV: Big Brain Theory
Pitches with Prototypes: Solar Tracker
Tool Review: BioLite CampStove
Grow: A Portable CNC Router System